Quadra-Fire CUMBGAP-MBK, CUMPGAP-PMH warranty Optional Blower Operating Instructions, Opacity Smoke

Page 29

R

Cumberland Gap Wood Stove

WARNING

Fire Risk.

DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS SUCH AS GASOLINE, NAPTHA OR ENGINE OIl.

Do NOT burn treated wood or wood with salt (driftwood).

May generate carbon monoxide if burn material other than wood.

May result in illness or possible death.

WARNING

Fire Risk.

Keep combustible materials, gasoline and other flammable vapors and liquids clear of appliance.

Do NOT store flammable materials in the appliance’s vicinity.

DO NOT USE GASOLINE, LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID OR SIMILAR LIQUIDS TO START OR “FRESHEN UP” A FIRE IN THIS HEATER.

Keep all such liquids well away from the heater while it is in use.

Combustible materials may ignite.

CAUTION

Odors and vapors released during initial operation.

Curing of high temperature paint.

Open windows for air circulation.

Odors may be irritating to sensitive individuals.

NOTE:

Build fire on brick firebox floor.

Do NOT use grates, andirons or other methods to support

fuel.

It will averserly affect emissions.

I.Optional Blower Operating Instructions

1.Initial (cold) start-up: Leave blower off until your stove is hot and a good coalbed is established. The blower may be turned on approximately 30 minutes after a good coalbed is established.

2.High burn setting: The blower may be left on through- out the burn at your desired setting.

3.Medium burn settings: The blower should be left off until a good burn is established, then turned on at your desired setting.

4.Low burn setting: The blower tends to cool off the stove. Leave blower off until burn is well established. Then turn on at your desired rate.

5.The highest blower speed is obtained by turning the speed control on and then adjusting counterclockwise towards "OFF" as far as possible without turning the blower off. For a low blower speed, turn the control knob clockwise as far as possible.

J. Opacity (Smoke)

Opacity is the measure of how cleanly your appliance is burning.

Opacity is measured in percent:

100% opacity is when an object is totally obscured by the smoke column from a chimney, and

0% opacity means that no smoke column can be seen.

As you become familiar with your appliance, you should peri- odically check the opacity. This will allow you to know how to burn as nearly smoke-free as possible (goal of 0% opacity).

WARNING !

The outside surfaces of this unit will become extremely hot during use.

If this appliance is in a high traffic area or children may be near it is recommended that you purchase a decorative bar- rior to go in front of the appliance.

Always keep children away while it is operating

Do not let anyone operate this appliance unless they are familiar with these operation instructions.

November 5, 2010

7006-188G

Page 29

Image 29
Contents Non-Catalytic, Front/Side Load, Wood Heater Cumberland GapCumberland Gap Wood Stove Testing LabSerial Number Model NameTable of Contents Appliance Certification Cumberland Gap Wood Stove Listing and Code ApprovalsBTU & Efficiency Specifications Mobile Home ApprovedDesign, Installation & Location Considerations Fire SafetyGetting Started Cumberland Gap Wood Stove Asphyxiation RiskWindward Negative PressureVenting Systems Flue Draft ConsiderationsTools And Supplies Needed Inspect Appliance & Components and Pre-Burn Check ListStove system with masonry chimney consists of Figure Typical Stove SystemsAppliance Dimensions Dimensions and ClearancesDouble Wall-USA Clearances To Combustibles UL And ULCSingle Wall-USA Hearth Protection Requirements Installation ConsiderationsUSA Required Canada Recommended Calculating Alternate Floor Protection MaterialCompleted View Reversible Flue Collar and Horizontal Flue Heat ShieldBaffle Diverter Baffle DiverterFire Risk Slanted corner Straight end to the backCut Ends Hand Bend #1 Hand bend #2 Straight End Baffle Diverter Is shipped Inside fireboxCumberland Gap Wood Stove Instructions To Unlock Side Fuel Door Leg Leveling SystemSide Fuel-Loading-Door Locking Mechanism Outside Air Kit Installation Installation Of Optional Blower Chimney Systems Cumberland Gap Wood Stove Chimney RequirementsVenting Components Instructions ComponentsAir Clearances Chimney Height / Rise and Run Masonry Chimney LinerMasonry Chimney Liner Contd Installing Chimney ComponentsRule Chimney Termination Requirements629M, Standard for Factory Built Chimneys Cumberland Gap Wood Stove Mobile Home InstallationCumberland Gap Wood Stove Appliance Set-Up Adjusting The Blower Speed ControlDoor Handle Assemblies Needs to move smoothlyOver-Firing Your Appliance Wood Selection and Storage Cumberland Gap Wood Stove Operating InstructionsHardwood vs Softwood Processed Solid Fuel Fire LogsMoisture Burning ProcessSeasoned Wood Storing WoodCombustible/Non-Combustible Materials Air ControlsFinal Stage Start-Up Air SystemBurn Rates Heat Output Settings Building a FireHigh Burn Rate Maximum Heat* 30,000+ BTU/hr Medium-Low Burn Rate* 10,000 to 15,000 BTU/hrOpacity Smoke Optional Blower Operating InstructionsClear Space Frequently Asked QuestionsIncorrect Positions Correct Baffle & Blanket PlacementCreosote Chimney Cleaning General MaintenanceAsh Removal System ARS Operating and Cleaning Injury RiskCleaning Plated Surfaces Glass Cleaning Frequency As desiredWhen cleaning glass Disposal of AshesGlass Replacement Inspect Firebrick & Replacement InstructionsAppliance Inspection Routine Fire Risk Injury RiskBaffle Removal & Installation Monthly Quick Reference Maintenance GuideStart Fire Problems Possible Cause Solution Cumberland Gap Wood Stove Troubleshooting GuideService Parts At Depot Service PartsStocked #20 Brick Set Stocked at DepotCumberland Gap Warranty Policy November 5 7006-188G Contact Information

CUMBGAP-MBK, CUMPGAP-PMH specifications

The Quadra-Fire CUMPGAP-PMH and CUMBGAP-MBK are established models in the realm of high-efficiency wood stoves, combining modern technology with traditional heating methods to provide an effective and environmentally friendly heating solution.

One of the standout features of the CUMPGAP-PMH and CUMBGAP-MBK models is their impressive heating efficiency. Both stoves exceed industry standards, ensuring that more heat is produced from less fuel, which not only helps in saving on heating costs but also reduces the environmental impact. Their efficient combustion technology means that these stoves produce minimal emissions, making them a responsible choice for eco-conscious consumers.

The construction of these stoves is designed with durability and robustness in mind. Made from high-quality materials, they assure longevity and reliability, which are crucial elements in heating appliances. The intelligently engineered airflow dynamics facilitate efficient burning, allowing these models to maintain optimal performance under various conditions.

Another significant feature of both models is the incorporation of advanced catalytic combustors. These catalysts improve the combustion process, resulting in cleaner burning and enhancing overall efficiency. The catalytic technology functions by allowing smoke and gases to pass through the catalyst, where they undergo additional burning before being released into the atmosphere. This process not only maximizes heat generation but also significantly lowers the emissions of harmful pollutants.

User convenience is also a top priority with these wood stoves. They feature large ash pans and simple loading mechanisms, making it easy to maintain and use them regularly. Their stylish design allows them to fit seamlessly into any home décor, and with variable heating capacities, they can effectively warm spaces of different sizes.

Safety features are another vital characteristic of the CUMPGAP-PMH and CUMBGAP-MBK models. With built-in heat shields and thermal protection, they provide peace of mind to homeowners while promoting safer operation. Additionally, they comply with various safety and efficiency standards set by regulatory bodies.

In conclusion, the Quadra-Fire CUMPGAP-PMH and CUMBGAP-MBK models stand out for their efficiency, design, advanced combustion technology, and safety features. They offer a modern solution to traditional wood heating, ensuring warmth and comfort while taking care of the environment. These stoves represent the perfect synergy of innovation and effectiveness in home heating solutions.