MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a levelling refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.
When the door of the freezer is higher than the fridge
Adjustment part
In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one at a time, as follows:
1.Unscrew the nut 1 from the lower hinge until it reaches the upper end of the bolt 2 .
3 Wrench
2 Bolt
1 Nut
When you release the nut 1 , make sure that you use the Allen wrench provided 3 to loosen the bolt 2 in a
2.Adjust the height difference between the doors by
turning the bolt 2 clockwise or counter
clockwise .
When you turn clockwise , the door will move up.
3.After adjusting the doors, turn the nut 1
clockwise until it reaches the lower end of the bolt, then tighten the bolt again with the
wrench 3 to fix the nut in place 1 .
If you do not secure the nut fi rmly, the bolt may release.
English - 22
2017. 5. 22. 2:38 |