SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
-Deteriorated insulation of electrical parts may cause an electric shock or fi re.
•Do not install this appliance near a heater, inflammable material.
•Do not plug several appliances into the same multiple power board.
The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matched the rating plate.
-This provides the best performance and also prevents overloading house wiring circuits, which could cause a
fi re hazard from overheated wires.
-There is a risk of electric shock or fi re.
•Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•Do not pull or excessively bend the power cord.
•Do not twist or tie the power cord.
•Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
•Do not use aerosols near the refrigerator.
-Aerosols used near the refrigerator may cause an explosion or fi re.
•Do not install this appliance in a location where gas may leak.
-This may result in an electric shock or fi re.
• The installation or any service of this appliance is recommended by a qualified technician or service company.
-Failing to do so may result in an electric shock, fi re, explosion, problems with the product, or injury.
•This refrigerator must be properly installed and located in accordance with the manual before it is used.
English - 5
2017. 5. 22. 2:38 |