3.Remove the 3 hex head bolts 7 attached to the upper left and right door hinges with a wrench (10 mm). With a Philips head screwdriver, remove the ground screw 8 attached to the upper left and right door hinges. Remove the upper left and right door hinges 9 .
8
7
9
4. Lift the door straight up to remove.
5.With a Philips head screwdriver, remove the two screws 10 attached to the lower left and right door hinges. With an wrench (5 mm), remove the two hex head bolts 11 attached to the lower left and right door hinges. Remove the lower left and right door hinges 12 .
12
10
11
DISASSEMBLE THE FREEZER DRAWER
1. Push the upper drawer in completely.
2.Remove the tilting pocket 1 by pulling on both brackets 2 upward at the same time.
1
2 
3.Take out the lower basket 3 by lifting the basket up from rail system.
3
4. Remove four 10mm hex-head bolts from both sides.
201 SETTINGOPERATINGUP
REATTACHING THE REFRIGERATOR DOORS
To reattach the fridge doors, assemble parts in reverse order.
1.The Water Line must be fully inserted to the center of transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.
Type A | Type B | |
| Dispenser | |
Center of Transparent | The Guide Lines | |
coupler | ||
|
5. Lift the freezer door up from the rails.
Putting too much food into the freezer
CAUTION drawers can prevent the freezer from closing completely and can cause frost
Setting up _9
15. 5. 7. 3:42 |