Samsung RFG23UEPN1/SML manual Assemble the Freezer Drawer, Adjusting the Freezer Drawer Level

ASSEMBLE THE FREEZER DRAWER

To reattach the freezer drawer, assemble parts in reverse order.

ADJUSTING THE DOORS

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make fi nal adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

Insert a fl at-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise

When the left	When the
door is lower	left door is
than the right	higher than
door.	the right
	door.

Adjustment part

Adjustment part

to lower the refrigerator and counterclockwise to raise it.)

1.If you open the drawer 1 , you can see the lower hinge 2 .

2.Insert a philips screwdriver (+) 3 into the shaft 4 of the lower hinge.

3.Adjust the height by turning a philips

screwdriver (+) 3 clockwise () or

counterclockwise ().

flat-blade Control screwdriver(-) Lever

Both control levers must be touching the CAUTION fl oor to avoid possible personal injury or

property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

(2)

(4)

(1)

(3) (3)

When you turn a philips screwdriver (+)

counterclockwise (), the door will move up.

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part Freezer Drawer

10_ Setting up

DA99-03403J-07.indb 10 15. 5. 7. ￿￿ 3:42