Samsung RF62HEPN1/BWT How to reverse the door Option, Remove 2 screws Separate front leg Cover

How to reverse the door (OPTION)

Unplug the refrigerator or disconnect the power.

Refer to the page 9, 10 for disassembling the door.

Cap

Cover

Cap

01 SETTING

1.Remove 2 screws.

2.Separate front leg Cover.

7.Separate low hinge shaft by using 5/32” wrench and disassemble low hinge leg by turning it colockwise, and then assemble the low hinge by turning it over.

10.The middle hinge for reversing a door can be found in the fridge.

3.Separate the Cap of the front leg Cover. (pull out inside of Cap)

4.Insert the Cap on the other side of the front leg Cover.

8.Reattach the former right hinge on the left side and the former left hinge on the right side by using 2bolts.

11.Change the middle hinges assembled at refrigerator to the middle hinges in the fridge with handles.

5.Remove 2 bolts of each hinge with the 10mm wrench.

6.Place them in front of each side.

9.Separate stopper by removing 1 screw on the right lower side of freezer and assemble the stopper on the left side by reversing it.

12.Use the black hinge cap of the middle hinge assembled at refrigerator. Then place it at the bottom of the left middle hinge

supplied separately.

Use the Flat-blade screwdriver(-).

UP

setting up _11

DA68-01868T.indb 섹션2:11 2011.7.4 9:22:6 PM