13.Place the hole in the bottom of the freezer door over the low hinge.
14.Replace the middle hinge connected to the freezer.
15.Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(Ø5mm).
16.Replace the cap on the middle hinge.
17.Place the hole in the bottom of the left door over the middle hinge.
20.Insert and tighten the ground screw into the left and right upper hinges with a philips screwdriver(+).
18.Insert the left upper hinge shaft into the hole on the corner of the fridge door.
21.Connect the electronic wire on the top of the refrigerator.
19.Insert the upper hinges into the holes at the top of the door.
Insert and tighten the 3 hex head bolts into the left and right upper hinges with a socket wrench(10mm).
22.Position the top table in place. Insert and tighten the 3 screws into the top table with a philips screwdriver(+).
12_ setting up
| 2011.7.4 9:22:8 PM |