Master Lock XR20 manual Extended Schedules, Date and Time, Extending a Closing Schedule

Page 25

4. The keypad then displays OP (open) 00:00 PM MON followed by CL (close) 00:00 PM MON and DELETE KEEP. Press the Select key under DELETE.

The keypad displays OPENING TIME?. Press COMMAND. The keypad now displays MON – : AM PM. Enter the time you want the burglary protection to be turned off. Use a 12 hour clock only (00:01 to 11:59). Press the Select key under AM or PM.

5.The keypad then displays CLOSING TIME?. Press the COMMAND key. The keypad then displays MON – : AM PM. If you want the schedule to be for consecutive days, press the Select key under MON to increment the days of the week. When the correct day is shown, enter the time you want the burglary protection to turn on.

6.To clear a schedule, press DELETE and then AM when the opening time is requested.

Press the Back Arrow key to exit the User Menu.

Extended Schedules

User Code Level: Master or Standard.

Function: This option allows users to extend today's programmed closing time schedule.

Extending a Closing Schedule

1.Access the User Menu.

2.Press the COMMAND key until SCHEDULES? displays. Press any Select key.

3.The keypad displays PRM EXT. Press the Select key under EXT.

The keypad displays – : AM PM. Enter in the new time for the closing schedule to expire.

Date and Time

User Code Level: Master only.

Function: Allows you to change the current date and time displayed on the keypad and used by the system for schedules and Display Events.

Setting the Date and Time

1.Access the User Menu.

2.Press COMMAND until TIME? displays. Press any Select key.

3.The keypad displays the current day and time. press the COMMAND key.

The keypad displays the current date. Press the COMMAND key to make any changes.

4.The keypad displays TIME DAY DATE. Press the Select key under TIME to change the time. The keypad displays – : AM PM. Enter the current time and select AM or PM.

The display changes back to TIME DAY DATE.

5.Press the Select key under DAY to change the day of the week. The keypad displays SUN MON TUE WED. If the current day is not displayed, press the COMMAND key. Press the Select key under the correct day.

6.Press the Select key under DATE to change the date. The keypad displays:

MONTH: - Enter one or two digits for the month. Press

COMMAND.

DAY: - Enter up to two digits for the day. Press COMMAND.

YEAR: - Enter up to two digits for the year. Press COMMAND.

The display returns to TIME DAY DATE. Press the Back Arrow key to exit the User Menu.

XR20 User Menu

21

Image 25
Contents XR20 Area Systems All/Perimeter and Home/Away SystemsSecurity Command Users Guide Draw a floorplan of your home or business Decide where to meetDevelop escape routes Practice your escape plansAbout Your Security System Security Command keypadParts of the System Test Your System WeeklyCharacter Keypad User Options Menu Security Command KeypadSelect keys Special Security Command Tones Special Security Command MessagesSystem Trouble or Service Required Understanding Security System Terms Central Station Monitoring Exit ErrorStatus Armed StatusArming Functions How your System OperatesArming the System Area System ArmingExample Office no YES Disarming an Area System Area System DisarmingSystem Ready/System Not Ready Keypad Displays All/Perimeter System ArmingInstant Arming Arming an All/Perimeter SystemAll/Perimeter System Disarming Disarming During an AlarmDisarming an All/Perimeter System Arming a Home/Away System Home/Away System ArmingHome/Away System Disarming Easy Exit FeatureDisarming a Home/Away System To access the User Menu Security Command User MenuUser Menu Options Menu Option DescriptionZone Activity Check User Check-inSending a Check-in Report Selecting Zone Activity CheckResetting the Sensors Sensor ResetEnter your user code to reset sensors Outputs On OffBypass Zones Using the Bypass Zones FunctionZone Monitor Using the System Test Function Using the Zone Monitor FunctionSystem Test User Code Authority Levels User CodesAdding User codes 6a. Temp Code no YES Changing User codes6c. ARM only no YES Ambush Codes Setting an Arming and Disarming ScheduleSchedules Deleting User codesExtended Schedules Setting the Date and TimeDate and Time Extending a Closing ScheduleDisplay Events Using the Display Events FunctionZone Activity Check Event Display Zone Bypass Event Displays BYP Bypass RST RestoreZone Event Displays User Check-in Event Displays Arming and Disarming Event DisplaysSupervisory Event Displays User Code Change Event DisplaysTest report was sent on Oct Station at the date and time shownSystem Monitor Event Displays Service Request?An AC failure occurred at 105 AM System Monitor Event Types There are 2 event typesProtection Areas System SetupOutputs HOW to Fill in this HOW to Fill in this Easy Entry Users Guide AppendixArming and Disarming AN ALL/PERIMETER System FA113 Users Guide Using the Alert ButtonsArming a Home/Away or All/Perimeter System Disarming a Home/Away or All/Perimeter SystemArea Names Pager Direct Users GuidePager Direct Area NameAlphanumeric Pager Display Numeric Pager DisplayYou will hear PhoneAccess Users GuidePress To do this You will hear Voice Module Common Keypad Displays Message Meaning Possible SolutionsIndex This page has been intentionally left blank LT-0303 5/02