Master Lock XR20 manual System Monitor Event Displays, Service Request?

Page 30

System Monitor Event Displays

This displays any loss of the system's AC power or battery.

16-Character Display		Description

POWER TBL 1017		An AC failure occurred on the system.
		Press the right Select key for the time.
32-Character Display		Description

TBL 1: 05A 10 / 17		An AC failure occurred at 1:05 AM.
AC POWER

System Monitor Event Types - There are 2 event types:

TBL - Trouble RST - Restore

System Monitor Event Names - There are 2 system monitors:

AC POWER

BATTERY

Service Request?

User Code Level: Master only

Function: Allows you to send a Request for Service message to the central station when there is a problem on your system.

After the Display Events function in the keypad User Menu, you will see the SERVICE REQUEST? display if it has been programmed for your user code. If this feature has been programmed, and you would like to send a Request for Service report to the central station, press any top row Select key while SERVICE REQUEST? is displayed. After the Request for Service report is sent, the keypad displays REQUEST MADE for four seconds.

If there is a problem with the telephone line connected to the system, you must contact our service department directly for assistance.

Note: This feature is not displayed if it has not been enabled on your system.

26	XR20 User Menu

Image 30

Contents XR20 All/Perimeter and Home/Away Systems Area SystemsSecurity Command Users Guide Develop escape routes Decide where to meetDraw a floorplan of your home or business Practice your escape plansParts of the System Security Command keypadAbout Your Security System Test Your System WeeklySecurity Command Keypad Character Keypad User Options MenuSelect keys Special Security Command Messages Special Security Command TonesSystem Trouble or Service Required Understanding Security System Terms Status Exit ErrorCentral Station Monitoring Armed StatusHow your System Operates Arming FunctionsArea System Arming Arming the SystemExample Office no YES Area System Disarming Disarming an Area SystemInstant Arming All/Perimeter System ArmingSystem Ready/System Not Ready Keypad Displays Arming an All/Perimeter SystemDisarming During an Alarm All/Perimeter System DisarmingDisarming an All/Perimeter System Home/Away System Arming Arming a Home/Away SystemEasy Exit Feature Home/Away System DisarmingDisarming a Home/Away System User Menu Options Security Command User MenuTo access the User Menu Menu Option DescriptionSending a Check-in Report User Check-inZone Activity Check Selecting Zone Activity CheckEnter your user code to reset sensors Sensor ResetResetting the Sensors Outputs On OffUsing the Bypass Zones Function Bypass ZonesZone Monitor Using the Zone Monitor Function Using the System Test FunctionSystem Test User Codes User Code Authority LevelsAdding User codes Changing User codes 6a. Temp Code no YES6c. ARM only no YES Schedules Setting an Arming and Disarming ScheduleAmbush Codes Deleting User codesDate and Time Setting the Date and TimeExtended Schedules Extending a Closing ScheduleUsing the Display Events Function Display EventsZone Activity Check Event Display BYP Bypass RST Restore Zone Bypass Event DisplaysZone Event Displays Arming and Disarming Event Displays User Check-in Event DisplaysTest report was sent on Oct User Code Change Event DisplaysSupervisory Event Displays Station at the date and time shownAn AC failure occurred at 105 AM Service Request?System Monitor Event Displays System Monitor Event Types There are 2 event typesSystem Setup Protection AreasOutputs HOW to Fill in this HOW to Fill in this Appendix Easy Entry Users GuideArming and Disarming AN ALL/PERIMETER System Arming a Home/Away or All/Perimeter System Using the Alert ButtonsFA113 Users Guide Disarming a Home/Away or All/Perimeter SystemPager Direct Pager Direct Users GuideArea Names Area NameNumeric Pager Display Alphanumeric Pager DisplayPhoneAccess Users Guide You will hearPress To do this You will hear Voice Module Message Meaning Possible Solutions Common Keypad DisplaysIndex This page has been intentionally left blank LT-0303 5/02