Napco Security Technologies GEM-RP3DGTL manual Ambush Ambush programmed? YES no

Page 11

TURNING OFF THE ALARM (DISARMING) WHEN RETURNING

Ambush (Ambush programmed? YES NO.)

The Ambush Code (optional) is a 2-digit code that is entered just prior to your Disarm Code. If an intruder forces you to disarm your system, (a) enter your Ambush Code; (b) enter your Disarm Code; (c) press the Jbutton.

Example: If your regular Arm/Disarm Code is 1234 and your Ambush Code is 99, press 9 9 1 2

34J. This will send a silent alarm to the central station.

The red ARMED light will go out and the keypad will appear as if the system were merely disarmed. There will be no indication that an alarm has been sent.

Day Zone (Day Zone(s) programmed? YES NO.)

A Day Zone is used to monitor a secured exit door, window foil, etc. A problem on this type of burglary zone will cause a pulsing keypad sounder while disarmed. To silence the sounder, press the C button (or arm and disarm, if so programmed). Correct the problem to reset the Day Zone.

24-Hour Zone (24-Hour Zone(s) programmed? YES NO.)

This zone is always armed, even if the system is disarmed. If there is no audible output (bell, siren, etc.) programmed for this zone, it will behave as a regular Burglary Zone, however an alarm will be reported to the central station and recorded in the Alarm Event Log. If an audible output is programmed, a 24-Hour Zone will behave as an armed Burglary Zone. If the system is subsequently armed with a 24-Hour Zone in trouble, the keypad sounder will come on momentarily to indicate that there is a problem on the zone.

11

GEM-RP3DGTL.pub

Wednesday, August 18, 1999 14:03

page 11

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ENT GEM-RP3DGTL KeypadImportant Test Your System Weekly T R O D U C T I onTable of Contents ENT A1 Keypad Controls & Indicators GeminiFunction Button. Selects available Keypad Controls & IndicatorsSetting the Alarm Arming When Leaving To arm any area Area Arming OptionalInstant Protection Protecting Yourself While on the PremisesBypassing Interior Zones Emergency Buttons Only available if programmed Alarm Indication Turning OFF the Alarm Disarming When ReturningAmbush Ambush programmed? YES no Fire-Zone Trouble Fire-Zone AlarmFire Protection Preparing a Fire Escape Plan Would You Like More Safety Information?Floorplan Limitations of Fire Alarm Warning Systems Keypad Functions Interior Bypass FIRE/TBL SYS TBL YES Keypad Functions Keypad Functions Central Station Monitoring Communicator FeaturesSecurity Bypass/Unbypass Advanced FeaturesExit-Delay Restart Programming User Codes Programming OptionalIntroduction Programming Example O S S a RY RF Low Battery Wireless sys O S S a RY System Trouble Error Codes T ES T ES Following Statement is Required by the FCC Napco Limited Warranty
Top Page Image Contents