Napco Security Technologies GEM-RP3DGTL manual Keypad Controls & Indicators

KEYPAD CONTROLS & INDICATORS

1	Window. Window. Lights indicate
	system status messages; digit display
	indicates related zone, function or er-
	ror message numbers.
2	STATUS Light. Lights (green) to indi-
	cate that the system is ready for arm-
	ing. If a zone is not secured, the light
	will be off and the zone will display in
	the window. If a zone has been by-
	passed, the STATUS light will blink
	while armed.
3	ARMED Light. Lights (red) to indicate
	that the system is armed. If an alarm
	has occurred, the ARMED LED will be
	flashing.
4	FUNCTION Button. Selects available

6RESET Button. (1) Resets various system troubles, displays, etc. (See text.) (2) Resets residential smoke detectors.

7Numerical Keys (1-9, 0). Used to enter codes, zone numbers, etc.

8ON/OFF Button. Entry key. Causes the entered code or selected function to be executed.

9INTERIOR Button. (1) Bypasses all Interior Zones simultaneously to allow free movement within the premises.

(2) Scrolls the window display forward (NEXT). (3) Answers “YES” toques- tions in the window display.

11AREA Button (*). Selects other ar- eas.

12Emergency Buttons. Used with the

G button to signal an emergency, as follows:

∙Press the 7 and the G buttons for Fire Emergency.

∙Press the 8 and the G buttons for Auxiliary Emergency.

∙Press the 9 and the G buttons for Police Emergency.

13AC Light. Indicates AC Power is pre- sent.

system functions as displayed in the

window. The selected function is exe-

cuted by pressing the Jto button or

the YES (E) button.

5 BYPASS Button. (1) Deactivates se-

lected zones from the system. (2) Un-

bypasses a bypassed zone.

INSTANT Button. (1) Cancels entry

10delay on Exit/Entry Zones, causing an instant alarm upon violation. (2) Scrolls window display backward (PRIOR). (3) Answers “NO” toques- tions in the window display.

5

GEM-RP3DGTL.pub	Wednesday, August 18, 1999 14:03
page 5