Napco Security Technologies GEM-RP3DGTL T R O D U C T I on, Important Test Your System Weekly

Page 2

I N T R O D U C T I ON

The GEM-RP3DGTL is a “smart”, in- teractive, menu-driven keypad de- signed for your Napco control panel. A digital display is provided to show the status of your system.

This booklet contains important infor- mation about the operation of your sys- tem with this GEM-RP3DGTL Keypad. Read it carefully and keep it handy for future reference. Check the Glossary for an explanation of terms that may be unfamiliar to you.

You'll probably find subjectsmen- tioned in this booklet that do not apply to your system. Napco control panels have such a wide variety of features that few security systems, if any, will ever need them all. Your alarm professional has chosen ap- propriate features for your particular needs.

Regardless of how your system has been configured, rest assured that it has been carefully designed and en-

gineered to the highest industry stan- dards. To assure optimum safety and security, familiarize yourself with this equipment. Periodically check its con- dition and state of readiness by testing it at least once a week in both the ac/battery and battery-only modes (ask your alarm professional how to make these tests).

IMPORTANT - TEST YOUR SYSTEM WEEKLY

Test your sounding device telephone line	2. While disarmed, enter your User Code then press the Abutton.
1. While disarmed, enter your User Code, then press the Abutton.	3. Answer NO (press (	F	) button) until “15” (Telephone Test) appears
2. Answer NO (press (F) button) until “3” (Bell Test) appears in the	in the window.	F
	in the window.
window.	4. Press YES (press (E) button) to send a test code to the central
3. Press YES (press (E) button) to execute the test. The alarm will	station.
sound for about two seconds. If the alarm does not sound or sounds	5. If the test is not successful, “E 03” will display, indicating acommuni-
weak, call for service.	cation failure. Call for service.
	Note: Any subsequent successful transmission will clear a “E 03”
Test your telephone line.	system trouble.
1. Notify your central station of the impending test.

2

GEM-RP3DGTL.pub	Wednesday, August 18, 1999 14:03
page 2

Image 2

Contents GEM-RP3DGTL Keypad ENTT R O D U C T I on Important Test Your System WeeklyTable of Contents Keypad Controls & Indicators Gemini ENT A1Keypad Controls & Indicators Function Button. Selects availableSetting the Alarm Arming When Leaving Area Arming Optional To arm any areaInstant Protection Protecting Yourself While on the PremisesBypassing Interior Zones Emergency Buttons Only available if programmed Turning OFF the Alarm Disarming When Returning Alarm IndicationAmbush Ambush programmed? YES no Fire-Zone Trouble Fire-Zone AlarmFire Protection Would You Like More Safety Information? Preparing a Fire Escape PlanFloorplan Limitations of Fire Alarm Warning Systems Keypad Functions Interior Bypass FIRE/TBL SYS TBL YES Keypad Functions Keypad Functions Communicator Features Central Station MonitoringAdvanced Features Security Bypass/UnbypassExit-Delay Restart Programming User Codes Programming OptionalIntroduction Programming Example O S S a RY RF Low Battery Wireless sys O S S a RY System Trouble Error Codes T ES T ES Napco Limited Warranty Following Statement is Required by the FCC