Napco Security Technologies GEM-RP3DGTL manual Keypad Functions

KEYPAD FUNCTIONS

14

INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

15

INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

16

INTERIOR BYPASS FIRE/TBL SYS TBL CHIME

14.Activate EZM Zone Find? For installer's use only. If accidentally enabled, press the C button to exit.

15.Activate Telephone Test? (Telephone Test programmed? YES NO.) Sends a communicator test to the central station. A communication failure will be indicated at the keypad by a system trouble “3” display. Repeat the test to attempt to correct a communication failure, as any successful communication will clear this display.

16.Delay Arming 1-4 Hours. (Not for UL-listed systems.) Allows automatic arming to be delayed up to 4 hours, 15 minutes, as follows:

For a 1-hour, 15-minute delay, press [1], then the Jbutton.

For a 2-hour, 15-minute delay, press [2], then the Jbutton.

For a 3-hour, 15-minute delay, press [3], then the Jbutton.

For a 4-hour, 15-minute delay, press [4], then the Jbutton.

Fifteen minutes prior to arming, the siren will sound a 2-second warning and the keypad will begin a 15-minute countdown with the sounder pulsing. During this time, arming may be delayed an additional 1 to 4 hours (as above), or autoarming may be cancelled by arming and disarming the panel.

19

GEM-RP3DGTL.pub	Wednesday, August 18, 1999 14:03
page 19