Napco Security Technologies F-TPG manual Following Statement is Required by the FCC

Page 27

THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class-B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

You may also find the helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commissions rules.

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

27

Image 27
Contents Napco Important Test Your System Weekly IntroductionTable of Contents Ready Armed Stay Fire TBL Garage Touchpad IndicatorsEmergency Buttons Garage Touchpad ControlsPress the Away button on the Touchpad Arming When LeavingPress either the Stay or Away button Bypassing Faulted ZonesSystem will arm with the faulted zones bypassed Press the Bypass buttonPress the Stay button on the Touchpad Arming When Staying HomeArming and Leaving with Others Staying Check the Garage Touchpad indicatorsExit the garage Exiting with the System Already ArmedIndicate the system has armed Emergency Buttons Disarming the System Disarming When Returning HomeSilencing AN Alarm If an alarm occurs while you are at homeIf an alarm occurs while you are away Fire Fire ProtectionImportant! Read Carefully Would You Like More Safety Information?Preparing a Fire Escape Plan Family RehearsalReady System Trouble Error CodesNone Zone List Enrolling a NEW F Ifob Adding additional IFOBs to your systemRemoving IFOBs from the system Lost Opener Mode Lost GAR AGE Door Opener ModeFederal Communications Commission FCC Part 68 Statement Page Page Napco Limited Warranty Page Following Statement is Required by the FCC Publicly traded on Nasdaq Symbol Nssc