Napco Security Technologies F-TPG Arming When Staying Home, Press the Stay button on the Touchpad

Page 8

ARMING WHEN STAYING HOME

Arming in the Stay mode allows you to remain home with the perimeter protection active and the interior protection off, so that you may move freely about the premises.

	1	READY	Check the Garage Touchpad indicators. The green READY light should be ON-STEADY, indicating
	1		that the system is ready to arm.
			that the system is ready to arm.
			• If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone
			number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close
			the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see page 7).
			• If the green READY light is OFF, the optional second deadbolt is not locked. If there are two deadbolts in the system, the
			other deadbolt must be locked before the system can be armed. Go to the other deadbolt location and lock it.

	2		Press the STAY button on the Touchpad.
	2
		ARMED	If the garage door is already closed, the ARMED indicator will light and STAY will begin to flash. The
		STAY	system will arm in the Stay mode within 3 minutes.
		STAY

3			If the garage door is NOT closed, close the garage door from the inside to arm the system.
3			If the garage door has not been closed within 3 minutes of pressing STAY, the system will re-
			vert back to a disarmed state. (Note: See page 13 if your garage door motor fails).


	STAY		The STAY indicator will stop flashing and light steady, indicating the system is armed in the Stay mode.
	STAY

8

Image 8

Contents Napco Introduction Important Test Your System WeeklyTable of Contents Garage Touchpad Indicators Ready Armed Stay Fire TBLGarage Touchpad Controls Emergency ButtonsArming When Leaving Press the Away button on the TouchpadBypassing Faulted Zones System will arm with the faulted zones bypassedPress the Bypass button Press either the Stay or Away buttonArming When Staying Home Press the Stay button on the TouchpadCheck the Garage Touchpad indicators Arming and Leaving with Others StayingExiting with the System Already Armed Exit the garageIndicate the system has armed Emergency Buttons Disarming When Returning Home Disarming the SystemIf an alarm occurs while you are away Silencing AN AlarmIf an alarm occurs while you are at home Fire Protection FireWould You Like More Safety Information? Preparing a Fire Escape PlanFamily Rehearsal Important! Read CarefullySystem Trouble Error Codes ReadyNone Zone List Removing IFOBs from the system Enrolling a NEW F IfobAdding additional IFOBs to your system Lost GAR AGE Door Opener Mode Lost Opener ModeFederal Communications Commission FCC Part 68 Statement Page Page Napco Limited Warranty Page Following Statement is Required by the FCC Publicly traded on Nasdaq Symbol Nssc