Napco Security Technologies GEM-K2AS manual Keypad Messages, Exitxx, ARMED1

Page 28

KEYPAD MESSAGES

The keypad can display the following functional messages. Many are two-line messages; hold down Gto display the sec-

ond line. (In this booklet, both are shown simultaneously for convenience). Other diagnostic messages are available for the installer or servicer. Should any unfamiliar messages appear, call your dealer for service.

READY

A C O N

WAIT

A C O N

EXITXX

A C O N

DISARM A C O N XXXSEC

ARMED1

A C O N

All zones operating; system can be armed. If displayed, a number following the “READY” display denotes the area number. A "MONITOR ON" display indicates that Chime or Watch Mode is on. Note: If Watch Mode is programmed, “MONITOR ON” will not display for Chime Mode.

Panel reporting to central station on arming. If necessary, wait for ringback signal before exiting.

Exit delay in progress. XX denotes exit time remaining. If displayed, BYPASSED indicates arming with zones bypassed; INSTANT ON indicates arming with Instant protection.

Entry delay in progress. XXX shows entry time remaining.

Panel armed. If displayed, a number following the ARMED display denotes the area number.

FAULT

A C O N

Zone(s) not secured (doors or windows may be open). Faulted zone(s) will scroll.

28

Image 28
Contents Operating Guide for your AC on ReadyImportant Test Your System Weekly IntroductionTest your sounding device Test your telephone line Table of Contents Keypad Controls & Indicators AC onEnter ResetStay Arming AW AY Setting the Alarm When Leaving Cant ARMArmznf ArmrstSystbl EXX-XXREADY1 CANT/ARMArming Stay Protecting Yourself AT Home Arming in Stay ModeSystem Armed Instant Protection Disarm Turning OFF the AL ARM Disarming When ReturningXxxsec Day Zone Day Zones programmed? !YES !NO Hour Zone 24-Hour Zones programmed? !YES !NOFire Protection FireZonexx TrblFamily Rehearsal Preparing a Fire Escape PlanImportant! Read Carefully Floorplan FloorplanLimitations of Fire Alarm Warning System Function Menu For user? !YES !NO R nO n / C h i me Y e s / N o L a y / Ar m 1 4/ / N o On Zone 1 has not been received Communicator Features Central Station MonitoringAdvanced Features ZONE02Bypass WaitPage Introduction Programming OptionalProgramming User Codes User Select the Program Mode as follows Programming ExampleExitxx Keypad MessagesARMED1 Alarm CancelArmsil ArmsndWrong AreaTime CodeAcfail LobattCommfl OvrrGlossary Closing Window Optional. aGlossary Priority Zone a zone that System Trouble Error Codes Napco Limited Warranty Following Statement is Required by the FCC