Displays alarms that have occurred on
Press the NEXT and PRIOR buttons to scroll zones.
Display Fire Alarms?
Displays a 2-digit error code (EXX-NN) representing the problem (XX) detected in the system, followed by 2 digits (NN) identifying the problem zone, keypad, module, etc. (See SYSTEM TROUBLE ERROR CODES for a description of these codes). Use NEXT and PRIOR buttons to scroll system troubles.
Display System Troubles?
Select Telephone #1-4 using the NEXT and PRIOR buttons. to automatically dial the displayed number.
(For GEM-P9600/3200 panels only)
(For GEM-P9600/3200 panels only)
Press U, then pick up the phone
FUNCTION MENU
D s p T e l / Li s t / Y e s / N o
Display Telephone List? (For GEM-P9600/3200 panels only) (OPTIONAL--Phone Numbers Pro- grammed? !YES !NO) The panel can dial any of four programmed telephone numbers.
D s p S y s / T r b l / Y e s / N o
r e s e t F I R E A L A R M | D s p F i r / Al a r m / |
A C O N | Y e s / N o |
|
| |
| |
T R O U B L E | D s p F i r / T r bl / |
A C O N | Y e s / N o |
|
| |
| |
| T u r nO n / O vi e w |
A C O N | Y e s / N o |
|
| |
| |
| O V ( R Z ) |
A C O N | |
| |
the Fire Zone(s).
Display Fire Troubles? (For GEM-P9600/3200 panels only) Displays trouble conditions that have been detected on the Fire Zone(s). Use NEXT and PRIOR to scroll fire troubles.
Activate Overview? (For GEM-P9600/3200 panels only) (OPTIONAL) (Overview programmed
for user? !YES !NO)
In a partitioned system, this mode displays the status of Areas 1 and 2 simultaneously. (The “READY1” display will be replace by the “OV(--)” display shown at left). For each area: “R” = Area Ready; “z” = Zone Fault; “A” = Area Armed; “B” Burglary Zone in Alarm; “F” Fire Zone in Alarm; “T” = Fire Trouble; "c” = Check Trouble; Area in Function-Display Mode.
In this mode, all areas (except the area that you are in) may be armed by pressing 9. G, then entering a valid User Code. (The User Code must be valid in all areas). Similarly, all ar- eas may be disarmed by pressing 0, G, then entering a valid User Code. To revert to normal keypad operation, enter a valid code, press Rrepeatedly until "TrnOff O View" appears, then press the YES (P) button.
