Napco Security Technologies GEM-K2AS manual Cant, Armznf, Armrst

Page 7

ARMING AW AY: SETTING THE ALARM WHEN LEAVING

 

CAN'T/

A C O N

ARM

 

 

 

 

 

CAN'T/

A C O N

ARMZNF

 

 

Priority Arming. If you attempt to arm with a faulted Priority Zone, a 3-second tone will sound at the keypad, and "CAN'T ARM" will display in the window, indicating that the trouble(s) must be corrected before the panel can be armed. A zone selected as Priority Zone with Bypass (check your Alarm Plan) may be bypassed if in trouble. If the problem cannot be corrected immediately, press C, then arm the panel. A 3 second beep will

sound at the panel to indicate arming with a Priority Zone in trouble. Be sure to have the trouble repaired as soon as possible.

CAN'T/

A C O N ARMSIL

Silence Alarm. If you enter your code while the alarm is sounding the message "CAN'T/ARMSIL" will be displayed. The system will silence the alarm and will be ready to be armed again.

CAN'T/

A C O N ARMSND

T R O U B L E

CAN'T/

 

A C O N

ARMRST

 

 

Alarm Sounding. If you are attempting to arm with Easy Arm (Optional) and the alarm is sounding, "CAN'T ARMSND" will be displayed. The alarm will not silence. Only a valid User Code will silence the alarm.

System Trouble. If you enter your User Code with a system trouble present, the message "CAN'T ARMRST" will be displayed. To arm, press Cand the system trou-

bles should disappear.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AC on Ready Operating Guide for yourImportant Test Your System Weekly IntroductionTest your sounding device Test your telephone line Table of Contents AC on Keypad Controls & IndicatorsEnter ResetStay Arming AW AY Setting the Alarm When Leaving Armrst CantARM ArmznfCANT/ARM SystblEXX-XX READY1Arming Stay Protecting Yourself AT Home Arming in Stay ModeSystem Armed Instant Protection Disarm Turning OFF the AL ARM Disarming When ReturningXxxsec Hour Zone 24-Hour Zones programmed? !YES !NO Day Zone Day Zones programmed? !YES !NOTrbl Fire ProtectionFire ZonexxFamily Rehearsal Preparing a Fire Escape PlanImportant! Read Carefully Floorplan FloorplanLimitations of Fire Alarm Warning System Function Menu For user? !YES !NO R nO n / C h i me Y e s / N o L a y / Ar m 1 4/ / N o On Zone 1 has not been received Central Station Monitoring Communicator FeaturesWait Advanced FeaturesZONE02 BypassPage Introduction Programming OptionalProgramming User Codes User Programming Example Select the Program Mode as followsExitxx Keypad MessagesARMED1 Armsnd AlarmCancel ArmsilCode WrongArea TimeOvrr AcfailLobatt CommflClosing Window Optional. a GlossaryGlossary Priority Zone a zone that System Trouble Error Codes Following Statement is Required by the FCC Napco Limited Warranty
Top Page Image Contents