Napco Security Technologies GEM-K2AS Turning OFF the AL ARM Disarming When Returning, Xxxsec

TURNING OFF THE AL ARM (DISARMING) WHEN RETURNING

		Disarming the System
	DISARM/
		1	Upon entry, the keypad sounder will turn on as a reminder to disarm the panel. The
A C O N	XXXSEC		red ARMED light will be on and the window will alternately display "DISARM" and
			"XXXSEC", where "XXX" represents the entry time remaining in 10-second steps.
	Wrong/	2	During the final 10 seconds, the sounder will pulse a warning signal.
A C O N	Code		Enter your User Code and press U. The sounder will silence and the red ARMED
			light will go out, indicating that the system has been disarmed.

ALARM/ A C O N ZONE02

•If you enter an invalid code, the keypad display "Wrong Code" Re-enter your code immediately.

Alarm Indication / Silencing an Alarm

If the red ARMED light is flashing and “ALARM” is displayed, an alarm occurred while you were out. Proceed with caution! If you suspect that an intruder may still be on the premises, leave immediately and call authorities from a neighbor's phone.

To silence an audible alarm:

1Enter your code and press U. After the system is disarmed, the window will continue

to display “ALARM” followed by the zone(s) violated.

2To reset the display, note the zones violated, then press C.

11