Monessen Hearth BTU/Hr installation manual Installation Options

Page 13

INSTALLATION

WARNING

Never install the heater

•in a bedroom or a bathroom • in a recreational vehicle • where curtains, furniture, clothing, or other flammable objects are less than 36 inches from the front, top, or sides of the heater

•as a fireplace insert

•in high traffic areas

•in windy or drafty areas

CAUTION

This heater creates warm air currents. These currents move heat to wall surfaces next to heater. Installing heater next to vinyl or cloth wall coverings or operating heater where impurities (such as tobacco smoke, aromatic candles, cleaning fluids, oil or kerosene lamps, etc.) in the air exist, may discolor walls.

IMPORTANT: Vent-free heaters add moisture to the air. Although this is beneficial, installing heater in rooms without enough ventilation air may cause mildew to form from too much moisture. See Fresh Air for Combustion and Ventilation, pages 8 through 10.

CAUTION

If you install the heater in a home

• locate heater where moving vehicle

 

garage

 

• heater pilot and burner must be at

 

least 18 inches above floor.

 

will not hit it.

 

 

INSTALLATION OPTIONS

There are three options for mounting this heater.

A.Mounting heater to wall

B.Mounting heater to optional hearth base

For convenience and efficiency, install heater

•where there is easy access for operation, inspection, and service.

•in coldest part of room.

An optional fan kit is available from your dealer. See “Accessories,” pages 28 and 29. If planning to use fan, locate heater near an electrical outlet.

C. Mounting heater to optional mantel (some mantels require the hearth base)

Continued

49D0090

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Read and Save These Instructions DHHP/NTWhat to do if YOU Smell GAS Contents Installer Owner Important Safety InformationImportant Safety Information Natural GAS Specifications and Local CodesPROPANE/LPG Local CodesAssembly Installing Hood Product Identification and AssemblyUnpacking Installing Logs AssemblyAttaching Brass Front Trim to Front PanelProviding Adequate Ventilation Fresh AIR for Combustion and VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining if YOU have a Confined or Unconfined Space Determining FRESH-AIR Flow for Heater Location From Inside Building Ventilation AIR Ventilation AIR from Outdoors Installation Items InstallationMounting Clearances As Viewed From Front of Heater Locating HeaterInstallation Options . If you can, provide greater Maintain minimum clearances shownClearances from floor and joining wall Mounting Heater to WallMounting Heater Onto Mounting Bracket Mounting Heater to Optional Hearth Base Mounting Heater to Optional MantelConnecting to GAS Supply Checking GAS Connections Pressure Testing Gas Supply Piping SystemWhat to do if YOU Smell GAS Operating InstructionsUsing the equipment shutoff valve Do not try to adjust heating levels byShutting OFF Burner only Pilot Stays LIT Shutting OFF HeaterPilot Flame Pattern Inspecting HeaterBurner Flame Pattern Observed Problem Possible Cause Remedy TroubleshootingObserved Remedy Problem Possible Cause TroubleshootingTroubleshooting Cleaning Burner Injector Holder Pilot AIR Inlet Hole Cleaning and MaintenanceCleaning Turn off heater and let cool beforeDescription QTY Dhhnt Dhhpt Illustrated Parts ListBrass Louvers Lbhh AccessoriesHearth Base HHB Corner Surrounds With HearthThermostat Forced AIR Blower Blohh 49D0090 49D0090 Five Year Warranty Lifetime WarrantyBasic Warranty
Top Page Image Contents