Lenovo 5068, 7567, 7558 manual Installing the computer cover

3.Lower and position the computer cover into place and then tighten the two screws computer cover.

1

to secure the

Figure 50. Installing the computer cover

4.Reinstall the system stand and system stand hinge cover. See “Removing and reinstalling the system stand” on page 86 and “Removing and reinstalling the system stand hinge cover” on page 85.

5.Lock the computer cover if you have an integrated cable lock.

6.Reconnect the external cables and power cord to the computer.

7.Depending on the parts you installed or replaced, you might need to confirm the updated information in the Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 53.

Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit (CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.

122ThinkCentre Edge Hardware Maintenance Manual