Lenovo 7567, 7558, 5068 manual XXX 001-255-XXX 001-256-XXX, XXX 001-264-XXX System IRQ error

Diagnostic Error Code	FRU/Action
001-038-XXXSystem Extension failure	1.	Adapter card
	2.	System board
001-039-XXXSystem DMI data structure error	1.	Flash the system. See “Flash update procedures”
		on page 151.
	2.	System board
001-040-XXXSystem IRQ failure	1.	Power-off/on system and re-test.
	2.	System board
001-041-XXXSystem DMA failure	1.	Power-off/on system and re-test.
	2.	System board
001-195-XXXSystem Test aborted by user	Information only Restart the test, if necessary
001-196-XXXSystem test halt, error threshold exceeded	1.	Press F3 to review the log file
	2.	Restart the test to reset the log file
001-197-XXXSystem test warning	1.	Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
001-198-XXXSystem test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Flash the system and retest. See “Flash update
		procedures” on page 151.
	3.	Go to “Undetermined problems” on page 78.
001-199-XXXSystem test failed, cause unknown	1.	Go to “Undetermined problems” on page 78.
	2.	Flash the system and re-test.
	3.	Replace component under function test.
001-250-XXXSystem ECC error	System board
001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX	System board
System DMA error
001-260-XXX 001-264-XXX System IRQ error	System board
001-268-XXXSystem IRQ1 failure	1.	Device on IRQ1
	2.	System board
001-269-XXXSystem IRQ2 failure	1.	Device on IRQ2
	2.	System board
001-270-XXXSystem IRQ3 failure	1.	Device on IRQ3
	2.	System board
001-271-XXXSystem IRQ4 failure	1.	Device on IRQ4
	2.	System board
001-272-XXXSystem IRQ5 failure	1.	Device on IRQ5
	2.	System board

60ThinkCentre Edge Hardware Maintenance Manual