Lenovo 5068, 7567, 7558 manual 001-00X-XXX System Error, 001-01X-XXX System Error

Diagnostic Error Code	FRU/Action
000-197-XXXBIOS test warning	1.	Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement
	4.	Replace the component under test.
000-198-XXXBIOS test aborted	1.	Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Flash the system and retest. See “Flash update
		procedures” on page 151.
	3.	Go to “Undetermined problems” on page 78.
000-199-XXXBIOS test failed, cause unknown	1.	Go to “Undetermined problems” on page 78.
	2.	Flash the system and re-test.
	3.	Replace component under function test.
000-250-XXXBIOS APM failure	1.	Flash the system. See “Flash update procedures”
		on page 151.
	2.	System board
000-270-XXXBIOS ACPI failure	1.	Flash the system. See “Flash update procedures”
		on page 151.
	2.	System board
001-000-XXXSystem Test Passed	No action
001-00X-XXX System Error	System board
001-01X-XXX System Error	System board
001-024-XXXSystem Addressing test failure	System board
001-025-XXXSystem Checksum Value error	1.	Flash the system. See “Flash update procedures”
		on page 151.
	2.	System board
001-026-XXXSystem FLASH data error	1.	Flash the system. See “Flash update procedures”
		on page 151.
	2.	System board
001-027-XXXSystem Configuration/Setup error	1.	Run the Setup Utility program.
	2.	Flash the system. See “Flash update procedures”
		on page 151.
	3.	System board
001-032-XXXSystem Device Controller failure	System board
001-034-XXXSystem Device Buffer Allocation failure	1.	Reboot the system.
	2.	Flash the system. See “Flash update procedures”
		on page 151.
	3.	Run memory test.
	4.	System board
001-035-XXXSystem Device Reset condition detected	System board
001-036-XXXSystem Register error	System board

Chapter 7. Symptom-to-FRU Index 59