Lenovo 7567 XXX 011-014-XXX Serial port Control, 011-03X-XXX 011-04X-XXX Serial port failure

Diagnostic Error Code	FRU/Action
005-2XX-XXX 005-3XX-XXX Video subsystem error	1. Video card, if installed
	2.	System board
006-000-XXXDiskette interface Test Passed	No action
006-0XX-XXXDiskette interface error	1.	Diskette drive Cable
	2.	Diskette drive
	3.	System board
006-195-XXXDiskette interface Test aborted by user	Information only Restart the test, if necessary
006-196-XXXDiskette interface test halt, error threshold	1.	Press F3 to review the log file.
exceeded	2.	Restart the test to reset the log file.
006-197-XXXDiskette interface test warning	1. If a component is called out, make sure it is
		connected and/or enabled.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
006-198-XXXDiskette interface test aborted	1. If a component is called out, make sure it is
		connected and/or enabled.
	2.	Flash the system and re-test. See “Flash update
		procedures” on page 151.
	3.	Go to “Undetermined problems” on page 78.
006-199-XXXDiskette interface test failed, cause unknown	1. Go to “Undetermined problems” on page 78.
	2.	Flash the system and re-test.
	3.	Replace component under function test.
006-25X-XXXDiskette interface Error	1.	Diskette drive cable
	2.	Diskette drive
	3.	System board
011-000-XXXSerial port Interface Test Passed	No action
011-001-XXXSerial port Presence	1. Remove external serial device, if present.
	2.	Run the Setup Utility program, enable port.
	3.	System board
011-002-XXX011-003-XXXSerial port Timeout/Parity	System board
error
011-013-XXX 011-014-XXX Serial port Control	System board
Signal/Loopback test failure
011-015-XXXSerial port External Loopback failure	1. Wrap plug
	2.	System board
011-027-XXXSerial port Configuration/Setup error	1. run the Setup Utility program, enable port
	2.	Flash the system. See “Flash update procedures”
		on page 151.
	3.	System board
011-03X-XXX 011-04X-XXX Serial port failure	System board
011-195-XXXSerial port Test aborted by user	Information only Restart the test, if necessary.

Chapter 7. Symptom-to-FRU Index 63