Lenovo 7558, 7567, 5068 manual 025-00X-XXX 025-01X-XXX IDE interface failure

Diagnostic Error Code	FRU/Action
018-250-XXXPCI Card Services error	1. PCI card
	2.	Riser card, if installed.
	3.	System board
020-000-XXXPCI Interface Test Passed	No action
020-0XX-XXXPCI Interface error	1. PCI card
	2.	Riser card, if installed.
	3.	System board
020-195-XXXPCI Test aborted by user	Information only Restart the test, if necessary
020-196-XXXPCI test halt, error threshold exceeded	1. Press F3 to review the log file.
	2.	Restart the test to reset the log file.
020-197-XXXPCI test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
020-198-XXXPCI test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using
		the Setup Utility program” on page 53.
	2.	Flash the system and re-test. See “Flash update
		procedures” on page 151.
	3.	Go to “Undetermined problems” on page 78.
020-199-XXXPCI test failed, cause unknown	1. Go to “Undetermined problems” on page 78.
	2.	Flash the system and re-test. See “Flash update
		procedures” on page 151.
	3.	Replace component under function test.
020-262-XXXPCI system error	1. PCI card
	2.	Riser card, if installed.
	3.	System board
025-000-XXXIDE interface Test Passed	No action
025-00X-XXX 025-01X-XXX IDE interface failure	1.	IDE signal cable
	2.	Check power supply voltages.
	3.	Reseat IDE signal cable.
	4.	IDE device
	5.	System board
025-027-XXXIDE interface Configuration/Setup error	1. IDE signal cable
	2.	Flash the system. See “Flash update procedures”
		on page 151.
	3.	Reseat IDE signal cable.
	4.	IDE device
	5.	System board

Chapter 7. Symptom-to-FRU Index 67