Breville BOV800XL /A Troubleshooting, Possible Problem, Easy Solution, TrOUBLESHOOTING, the door

TROUBLESHOOTING

POSSIBLE PROBLEM	EASY SOLUTION
	• Check that the power plug is securely inserted
	into the outlet
Oven will not switch	• Insert the power plug into an independent outlet
"ON"	• Insert the power plug into a different outlet
	• Reset the circuit breaker if necessary
	• The oven will remember the last setting used for
I would like to have	each function unless you remove the plug from
	the wall outlet.
the oven LCD default	• To restore the oven’s default settings for each
settings back
	function, remove the plug from the wall outlet.
	Wait 5 seconds, then plug back in.
	• The oven goes into standby mode if not used
	for 10 minutes. When in standby mode, the LCD
	screen will cease to illuminate, however all
The LCD display light	function options will still be visible.
has gone out	• To re-activate the oven out of standby mode,
	press the START/CANCEL button on the control
	panel, or turn any dial. The LCD screen will
	re-illuminate.
	• Some large pizzas may brown unevenly in
The pizza does not	compact ovens. Open the oven door half way
cook evenly	through the cooking time and turn the pizza 90
	degrees for more even browning.
The Magnetic	• Always open the door slowly and in a controlled
Auto-Rack Eject comes	manner when the wire rack is inserted into this
out too far when I open	rack height position to prevent the wire rack from
the door	ejecting too quickly.
I cannot select the	• The FROZEN FOODS button is only selectable
	during the TOAST, BAGEL, PIZZA and COOKIE
FROZEN FOODS button
	functions.
Steam is coming out	• This is normal. The door is vented to release
from the top of the	steam created from high-moisture content foods
oven door	such as frozen breads.

TrOUBLESHOOTING

POSSIBLE PROBLEM	EASY SOLUTION
The heating elements	• Element IQ™ accurately controls the heat inside
	the oven by pulsing the power in the heating
appear to be pulsing
	elements in short bursts. This is normal.
Water is dripping onto	• This is normal. The condensation created from
	high moisture content foods such as frozen
benchtop from under
	breads will run down the inside of the door and
door
	can drip onto the bench.
	• The LCD screen will display 'E01' when there is
The LCD screen	a non-resettable issue with the appliance. Should
	this this occur, immediately remove the power
displays 'E01'
	cord from the wall outlet and call the Breville
	Customer Service Center (1-866-BREVILLE).
	• The LCD screen will display 'E02' when there is
The LCD screen	a non-resettable issue with the appliance. Should
	this this occur, immediately remove the power
displays 'E02'
	cord from the wall outlet and call the Breville
	Customer Service Center (1-866-BREVILLE).
	• The LCD screen will display 'E03' if the oven
	temperature is above the set maximum limit.
The LCD screen	Remove the plug from the wall outlet, allow the
	oven to cool for 15 minutes, then plug back in.
displays 'E03'
	• Call Breville Customer Service (1-866-BREVILLE)
	if the 'E03' message continues.
The LCD screen	• The LCD screen will display 'E04' if the room
	temperature is below the set minimum. Unplug
displays 'E04'
	the oven and relocate to to a warmer area.
	• The LCD screen will display 'E05' when there is a
The LCD screen	non-resettable issue with the appliance. Should
	this occur, immediately remove the power cord
displays 'E05'
	from the wall outlet and call the Breville Customer
	Service Center (1-866-BREVILLE)

48 49