Monessen Hearth DBX24C* manual Getting Started, Pilot, Thermal Generator

Page 7

 

 

PRODUCT SPECIFICATIONS and GETTING STARTED

 

Milli-Volt control has four (4) positions:

OFF

-

All gas to the gas logs is shut off at the valve.

IGN

-

Valve position to light/maintain a standing pilot.

ON

-

Valve position to turn ON/OFF log set with remote switch/thermostat.

LOW/HI

-

Variable position to control flame height (heat output). Both front and rear burners are in operation to

 

 

provide realistic glow and yellow flame.

PILOT

The gas log heater is fitted with a specially designed safety pilot light which senses the amount of oxygen available in the room and shuts the gas log heater off if the oxygen level begins to drop below a satisfactory level. The pilot can only be relit when adequate fresh air is available.

THERMAL GENERATOR

The milli-volt gas log pilot is fitted with a milli-volt generator to provide power for remote activation.

GETTING STARTED

Make sure you have received all parts:

Check your packing list to verify that all listed parts have been received. You should have the following:

Unvented gas heater

• Two (2) 90°-angle brackets

• Trim kit

Installation/operating instructions

• Canopy and three (3) screws

• Two (2) anchoring screws

Ceramic fiber logs

• Four (4) black screws

 

Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.

• Hand held Remote with receiver

• Wall T-stat with 20' wire

 

• Wall switch with 20' wire

• Hand held Thermostat Remote w/receiver

 

CAUTION

from loose fibers. Logs are fragile — handle with care.

 

 

Handle the gas log burner assembly by the grate only. Do not pick the unit up by

 

 

 

the burners.

 

 

Gloves are recommended when handling ceramic fiber logs to prevent skin irritation

 

 

 

 

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts in good condition.

What you will need for installation:

You must have the following items available before proceeding with installation:

• External regulator (for propane/LPG only)

Manual shutoff valve

• Piping which complies with local codes

Sediment trap

Phillips head screwdriver

Tee joint.

Pipe sealant approved for use with propane/LPG

Pipe wrench

 

(Resistant to sulfur compounds)

 

 

33D4047

7

Image 7
Contents What to do if YOU Smell GAS Installation and Operating InstructionsModels DFX24C DBX24C DFX32C Read and Save These InstructionsContents Installer Important Safety InformationOwner Important Safety Information Operation Product FeaturesPropane / LPG Natural GASPilot Getting StartedThermal Generator DFX24C/DBX24C DFX32C General Installation InformationAdequate Combustion and Ventilation AIR Codes15 1/ 2 x 12 x Remove fireplace screen See , page 14 and logs Installing Optional Firebrick PanelsAttaching Assembled Black Black Trim Installation DFX24C/DBX24CLining Up Corners of Trim Kit Black Trim Installation DFX32CRemoving Screen Installing CanopyRemoving Grate Securing Heater to Floor or HearthSuggested Locations Location of FireplaceMinimum42 Or /8 Fireplace FramingCustom Cabinet Tee Joint Sediment Trap Pipe Nipple Minimum Cap Connecting the GASManual Control Figure Checking GAS PressureThat does not Require 110 VAC to Electrical Wiring MILLI-VOLTConnecting Optional Wall Switch or Thermostat OperateChecking System Operation Connecting Remote ReceiverComplete Millivolt System Check Proper Installation Sequence DFX24C LOG PlacementProper Installation Sequence DBX24C Proper Installation Sequence DFX32CManual and Thermostat Control Flame AppearanceChecking the Pilot Flame MILLI-VOLT ControlChecking Burner Flame Installing Rock Wool and Checking Burner FlameClean Placing Rock WoolOperating Instructions Checking the Burner FlameOperating Instructions For Your Safety Read Before LightingWhat to do if YOU Smell GAS To Turn OFF GAS to Heater Manual Control Lighting InstructionsRotation of Control Knob Thermostatic Control Lighting InstructionsPilot MILLI-VOLT Control Lighting InstructionsMatch Lighting Instructions Cleaning and ServicingBrass Louvers Blower and Other Optional EquipmentOptional Equipment Forced AIR KITStandard Features Illustrated Parts Breakdown for Cabinet AccessoriesDFX24C MILLI-VOLT DFX24C Manual Illustrated Parts BreakdownLOG SET Replacement Parts ListParts AVAILABLE, not Shown DFX32C MILLI-VOLT DFX32C Manual 33D5511 DBX24C T-STAT AVAILABLE, not Shown DBX24C T-STATDescription Natural PropaneObserved Problem Possible Cause Remedy TroubleshootingTroubleshooting Five Year Warranty Lifetime WarrantyBasic Warranty

DBX24C* specifications

The Monessen Hearth DBX24C* is a distinguished direct vent gas fireplace designed to provide warmth, aesthetics, and versatility for modern homes. With a focus on efficiency and style, the DBX24C* stands out in the market for its combination of innovative technology and classic fireplace charm.

One of the main features of the DBX24C* is its impressive heating output. This fireplace operates efficiently to produce a maximum of 24,000 BTUs, making it suitable for heating larger spaces while maintaining a balanced and comfortable ambiance. The direct venting system enhances its efficiency by drawing in air from outside, ensuring that indoor air quality remains uncompromised while also minimizing heat loss.

The design of the DBX24C* is another pivotal characteristic. Available in various finishes, including sleek black and contemporary stainless steel, it can complement a range of interior decors. Its clean-face design eliminates the need for a traditional fireplace mantle, allowing for a more modern look that highlights the fire's radiant glow. The minimalist aesthetics also allow for flexible installation options, making it an ideal choice for both new homes and renovations.

In terms of technology, the Monessen DBX24C* boasts a modern control system, allowing for easy adjustments to flame height and heat output. The remote control capability enhances convenience, letting users control the fireplace from the comfort of their seating area. Additionally, the unit is equipped with an electronic ignition system, which ensures swift and reliable startup while also providing added safety through its on-demand control.

Burning clean with natural gas or propane, the DBX24C* is designed with environmental consciousness in mind. Its high-efficiency operation exceeds industry standards, resulting in lower emissions and reduced environmental impact. This makes the DBX24C* not only an aesthetically pleasing choice but also an eco-friendly one.

Overall, the Monessen Hearth DBX24C* delivers an exceptional combination of performance, design, and technology. With impressive heating capacity, sleek aesthetics, remote control functionality, and commitment to environmental friendliness, it offers homeowners a reliable and attractive solution for heating and enhancing their living spaces. Whether you are looking to upgrade an existing fireplace or install a new one, the DBX24C* stands as a premier option in the world of gas fireplaces.