Vermont Casting 1695 installation instructions Chimney System, Annual Maintenance

Page 28

Vermont Castings Intrepid Multi-Fuel

The Chimney System

Creosote

Your Intrepid Multi-fuel is designed to reduce creosote buildup significantly. However, regular chimney inspec- tion and maintenance must still be performed. For safety, good stove performance, and to protect your chimney and chimney connector, inspect the chimney and chimney connector on a regular schedule. Clean the system if necessary. Failure to keep the chimney and connector system clean can result in a serious chimney fire.

When wood is burned slowly, it produces tar, organic vapors and moisture that combine to form creosote. The creosote vapors condense in the relatively cool chimney flue. As a result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an extremely hot fire within the flue system that can dam- age the chimney and overheat adjacent combustible material.

If you do have a chimney fire, act promptly to:

Close the damper and thermostat lever.

Get everyone out of the house.

Call the Fire Department.

You should inspect the system every two weeks during the heating season as part of a regular maintenance schedule. To inspect the chimney, let the stove cool completely. Then, using a mirror and a strong light, sight up through the flue collar into the chimney flue. If it is not possible to inspect the flue system in this fashion the stove must be disconnected to provide better view- ing access.

If a significant layer of creosote has accumulated - 1/8” (3mm) or more - remove it to reduce the risk of a chim- ney fire.

Clean the chimney using a brush the same size and shape as the flue liner. Flexible fiberglass rods are used to run the brush up and down the liner, causing any deposits to fall to the bottom of the chimney where they can be removed through the clean out door.

The chimney connector should be cleaned by discon- necting the sections, taking them outside, and removing any deposits with a stiff wire brush. Reinstall the con- nector sections after cleaning, being sure to secure the individual sections with sheet metal screws.

If you cannot inspect or clean the chimney yourself, contact your local Vermont Casings, Majestic Prod- ucts authorized dealer or hire a professional chimney sweep.

Annual Maintenance

Perform a thorough cleaning, inspection and repair each spring, at the end of the heating season.

Thoroughly clean the chimney and chimney con- nector.

Inspect the chimney for damage and deterioration. Replace weak sections of prefabricated chimney. Have a mason make repairs to a masonry chimney.

Inspect the chimney connector and replace any damaged sections.

Check gasketing for wear or compression, and re- place if necessary. A ‘paper test’ will guide you on this. Close and lock the door or damper on a slip of paper and then try to pull the paper out. If the paper pulls out with little or no resistance, the gasket is not snug enough at that spot. If adjusting the damper or latch does not result in a seal that makes it hard to pull the paper out, replace the gasketing.

Check door and damper handles for tightness. Adjust if needed.

Check heat shield screws. Tighten as necessary.

Clean dust from the inner sides of bottom, rear and connector heat shields.

Remove ashes from the ash pan and replace with moisture absorbing material (such as cat litter) to keep the stove interior dry. Close the stove door to keep cats from using the litter.

Touch up the paint on black stoves.

Please record the following information

for future reference.

Stove Serial No. __________________________

Dealer _________________________________

________________________________________

________________________________________

Phone __________________________________

Date Purchased __________________________

Installer ___________________________

_______________________________________

_______________________________________

Phone _______________________________

Date Installed _________________________

28

2000970

Image 28
Contents Intrepid Table of Contents WelcomeSpecifications Intrepid Multi-Fuel, Model 1695, 1696Outside Air InstallationWhat Kind of Chimney to Use Chimney Connector Guidelines Masonry ChimneysPrefabricated Chimneys Chimney SizeDouble-wall Chimney Connector Single-wall Chimney ConnectorSecuring the Single-wall Connector to a Masonry Chimney Freestanding Chimney InstallationsFireplace Chimney Installations Above a Fireplace Fireplace Chimney Installations Through a FireplaceWall Pass-Throughs An approved wall pass-through for the United StatesFloor Protection for Fireplace Installations Floor ProtectionChimney Connector Clearance Reductions Reducing ClearancesStove Heat Shields Wall ShieldsFireplace and Mantel Trim Shields Measured from the top and sides of the stoveAlcove Installations Construction RequirementsIntrepid Multi-Fuel Clearance Chart Intrepid Multi-fuel Clearance Diagrams Wall Shield Requirements for Common Installations Parallel Installations Assembly Intrepid Multi-fuel’s Controls OperationPrimary Air Control Damper Glass Door PanelsFront Grate Two Ways to Add FuelUse the Air Control Settings that Work Best for You Damper must be open when starting a fire or when refuelingRefuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burn wellAsh Disposal Draft ManagementSteel Chimney Indoor/Outdoor locationPipe & Chimney Layout Single VentingCreosote FuelNegative Pressure Draft TestingConclusion Maintenance How to Adjust the Door Latch Damper AdjustmentTighten the Damper Handle as Needed Replace the Stove Gaskets as NeededAdjust the Door if Necessary Permanent GasketsAnnual Maintenance Chimney SystemIntrepid Multi-Fuel Heater Intrepid Multi-Fuel Heater Intrepid Multi-Fuel Heater Warranty

1695 specifications

The Vermont Castings 1695 is a stellar model in the realm of wood stoves, noted for its blend of traditional craftsmanship and modern efficiency. This timeless piece not only serves as a functional heating solution but also as a stylish addition to home décor, making it a popular choice for homeowners seeking both utility and aesthetics.

One of the standout features of the Vermont Castings 1695 is its impressive heating capacity. With the ability to heat areas up to 2,000 square feet, this stove is ideal for larger living spaces or for providing supplementary heat in smaller homes. Its robust construction, crafted from heavy-duty cast iron, ensures that heat is evenly distributed throughout the room, creating a cozy atmosphere.

The 1695’s primary innovation lies in its advanced combustion technology. With a patented secondary combustion process, this wood stove maximizes efficiency by re-burning gases and particulates that would typically escape through the flue. This not only results in cleaner emissions, which is beneficial for the environment, but also means longer burn times and less frequent reloading of wood, allowing users to enjoy their fire without constant maintenance.

Moreover, the Vermont Castings 1695 features a smooth-operating air control system. This system enables users to easily adjust the burn rate, which helps to manage heat output and fuel consumption. This level of control ensures that the stove operates at peak efficiency, reducing waste and optimizing performance.

In terms of design, the Vermont Castings 1695 boasts an elegant look with a classic cast-iron façade and an attractive firebox window. The large viewing window allows users to enjoy the mesmerizing flames while providing a source of warmth. The design is not just visually appealing; the cast iron surface also retains heat well, radiating warmth long after the fire has died down.

Durability is another hallmark of the Vermont Castings brand, and the 1695 model is no exception. Built to last, it withstands the rigors of regular use, making it a wise investment for homeowners. Additionally, the stove is available in various finishes, allowing for customization to fit different home styles.

In summary, the Vermont Castings 1695 is a well-rounded wood stove that combines traditional aesthetics with modern technologies. Its efficiency, effective heating capability, and attractive design make it a favored choice among wood stove enthusiasts and environmentally conscious consumers alike. Whether used as a primary heating source or a supplemental one, this stove delivers warmth, comfort, and style.