Water Piping

Recommended water hardness is 4-6 grains of hardness per gallon. Chlorides must NOT exceed 50 parts per million. Water hardness above 6 grains per gallon should be treated with a proper water conditioner (water softener or in-line treatment). Water hardness below 4 grains per gallon also requires water treatment to reduce its corrosive effects. Sediment, silica, chlorides or other dissolved solids may require particulate filtration or reverse osmosis treatment. Proper water treatment has been shown to reduce machine cleaning, mineral build-up, detergent usage and corrosion of metal surfaces in booster heaters and dishwashers.

Damage caused by water conditions is not covered under warranty.

WARNING: All piping and plumbing connections must comply with applicable sanitary, safety and plumbing codes.

CAUTION: All piping and any components connected to this appliance for the purpose of space heating shall be suitable for use with potable water. Toxic chemicals, such as used for boiler treatment, shall not be introduced into the potable water used for space heating. This appliance, when used to supply potable water, shall not be connected to any heating system or component(s) previously used with a non-potable water heating appliance or system.

The inlet and outlet water connections are 1 inch NPT (inlet is 1” female pipe, outlet is 1” male pipe). An inlet and outlet union adaptor is provided with your POWERMAXtm Booster Heater.

The inlet water supplied to the booster heater should be a minimum of 110-degrees Fahrenheit, except in the case of single rack, door type dishwashers and some “water- saver” conveyor machines, in which case incoming water can be as low as 45 degrees Fahrenheit. DO NOT connect the POWERMAXtm Booster Heater to a cold water supply pipe if it is to be used with a full flow conveyor dishwasher.

Recommended flowing water pressure to the booster heater is 45 p.s.i. Flowing water pressure at the dishwasher rinse valve should be 20 p.s.i. An optional pressure regulating valve and pressure gauge for the booster heater outlet is available from Vanguard Technology if the dishwasher is not equipped with these items. The supply water inlet to the booster heater does not require a pressure-regulating valve unless the supply water pressure exceeds 50 p.s.i. A full-flow shut off valve must be provided in the water supply piping to the booster heater. Installation of a suitable water hammer arrester is recommended between the booster heater and the dishwasher rinse valve.

A drain valve assembly is provided for installation on the lower outlet at the back of the booster heater.

The Temperature and Pressure Relief valve is installed at the left side of the booster heater. Install a suitable 3/4” i.d. drainpipe from the discharge of the Temperature and Pressure Relief valve to a suitable drain or catch pan with drain. The Temperature and Pressure Relief valve should be manually test-operated at least once annually to ensure that it is functioning properly. Be careful when operating the relief valve.

PM200, PM400 specifications

The Vanguard Heating PM200 and PM400 models represent a significant advancement in the world of heating solutions, designed specifically to provide efficient and effective warmth to various spaces. These heating units are renowned for their performance, reliability, and innovative features, making them ideal for both residential and commercial applications.

The PM200 is a compact yet powerful heating solution that delivers an impressive 200,000 BTU output. This model is particularly favored for smaller spaces or areas where precise heating is required. One of its standout features is its user-friendly digital thermostat, allowing for easy temperature adjustments and precise control over heating schedules. This digital interface enhances user experience, providing necessary information at a glance and facilitating efficient energy usage.

On the other hand, the PM400 offers an even more robust heating capacity, with an output of 400,000 BTU. This model is designed for larger spaces or commercial environments that demand higher heating output. Both units come equipped with advanced technology that allows them to operate efficiently while minimizing energy consumption. The high-efficiency heat exchangers used in both models are engineered to maximize heat transfer, ensuring that energy is used judiciously.

Vanguard Heating has also incorporated safety features into the PM200 and PM400 to enhance user protection. Each unit comes with an integrated overheat protection system, ensuring that operations are safe even during extended usage. Additionally, the units are designed with durable materials that contribute to their longevity, minimizing the need for frequent replacements or repairs.

Both models are versatile, allowing for various installation methods, including wall-mounted or freestanding configurations. This adaptability ensures that they can fit seamlessly into any space without disrupting the overall aesthetic.

Moreover, the PM200 and PM400 units are engineered for quiet operation, which is a crucial feature for both residential and commercial settings. Their design ensures that they do not become a source of distraction, allowing users to enjoy a comfortable environment without the accompanying noise often associated with traditional heating systems.

In summary, Vanguard Heating PM200 and PM400 models are excellent choices for those seeking reliable, efficient, and user-friendly heating solutions. With their range of features and technologies, they continue to set the standard in the heating industry, ensuring users enjoy optimal comfort in any setting.