Limited Warranty, Vanguard TECHNOLOGY, INC

LIMITED WARRANTY:

Products manufactured by Vanguard Technology. Inc. are warranted to be free from defects in material and workmanship, when installed and maintained in accordance with Vanguard’s instructions and in normal use and service for the time periods, terms and conditions as set forth below:

1)For a period of One Year from date of installation, but no longer than 18 months from factory shipment, Vanguard will, at its sole discretion, repair or replace defective parts, assemblies or entire units, including labor costs of its authorized service agency. Travel expense of Vanguard’s authorized service agent will be paid for the first ninety (90) days of this period, not to exceed sixty (60) miles or two (2) hours.

2)For an additional Four Years, Vanguard warrants the fin tube heat exchanger in the PowerMax Gas Booster to be free from defects in material or workmanship. At Vanguard Technology’s sole discretion and in accordance with this warranty, defective heat exchangers will be replaced on a pro-rated and parts only basis. i.e. Owner will pay a percentage of the current list price of a replacement heat exchanger as follows: Failure within first year, no charge: within second year, 20%; within third year, within fourth year, 60%; within fifth year 80%.

3)The stainless steel accumulator is covered by a limited lifetime warranty and is warranted to be free from leaks for this time. Any attached gauges; controls or other parts are subject to the standard one-year parts and labor warranty.

This warranty is limited to the foregoing and does not apply to defect or malfunction resulting from or caused by installation, operation or maintenance not in accordance with manufacturer’s instructions, damage related to shipping, accident, abuse, fire, flood, or other acts of God; units operated in corrosive or other damaging atmospheres or at temperatures outside specified operating range. Damage caused by freezing, improper water conditions (excessively

acidic or alkaline water, excessive pressure, chemical contamination, sediment build-up, etc.), incorrect electrical supply or connection, insufficient combustion air or negative draft, insufficient water supply, stray current or voltage conducted through water piping, or unauthorized alteration shall in no way be covered under this warranty. Cleaning of filters, pumps, valves, burners, fans or electrical connections, tightening of threaded connections and/or adjustment or calibration of controls is considered a part of normal installation and/or maintenance and is not covered under this warranty. Hot surface igniters are considered a consumable item, similar to a spark plug, and are not generally considered a warranty item. Accessory components sold but not installed by Vanguard are covered by a one-year parts-only warranty. Warranty on replaced parts or assemblies shall be the lesser of 90 days or the unexpired portion of the original warranty. Factory reconditioned and tested parts may be used to satisfy claims under this warranty. Warranty work shall be done only by Vanguard Technology’s authorized service agency during normal working hours. Overtime labor will not be paid under this warranty.

There are no other expressed or implied warranties of any kind, including but not limited to any implied warranty of merchantability or fitness for any particular purpose or usage. The remedies under this warranty as set forth here-in are at the exclusion of all others and Vanguard Technology, Inc., neither assumes nor authorizes anyone to assume for it any other obligations. In no event shall Vanguard Technology, Inc. be liable for any remote or consequential damage of any nature, no matter how arising or from any cause whatsoever, or any amounts in excess of the selling price of the product. Vanguard Technology’s policy of constant Quality Improvement means that prices, specifications, and policies are subject to change at any time and without notice.

VANGUARD TECHNOLOGY, INC.

29495 Airport Road, Eugene, OR 97402 541-461-6020 • FAX 541-461-6023

800-624-4809

R12/03

PM200, PM400 specifications

The Vanguard Heating PM200 and PM400 models represent a significant advancement in the world of heating solutions, designed specifically to provide efficient and effective warmth to various spaces. These heating units are renowned for their performance, reliability, and innovative features, making them ideal for both residential and commercial applications.

The PM200 is a compact yet powerful heating solution that delivers an impressive 200,000 BTU output. This model is particularly favored for smaller spaces or areas where precise heating is required. One of its standout features is its user-friendly digital thermostat, allowing for easy temperature adjustments and precise control over heating schedules. This digital interface enhances user experience, providing necessary information at a glance and facilitating efficient energy usage.

On the other hand, the PM400 offers an even more robust heating capacity, with an output of 400,000 BTU. This model is designed for larger spaces or commercial environments that demand higher heating output. Both units come equipped with advanced technology that allows them to operate efficiently while minimizing energy consumption. The high-efficiency heat exchangers used in both models are engineered to maximize heat transfer, ensuring that energy is used judiciously.

Vanguard Heating has also incorporated safety features into the PM200 and PM400 to enhance user protection. Each unit comes with an integrated overheat protection system, ensuring that operations are safe even during extended usage. Additionally, the units are designed with durable materials that contribute to their longevity, minimizing the need for frequent replacements or repairs.

Both models are versatile, allowing for various installation methods, including wall-mounted or freestanding configurations. This adaptability ensures that they can fit seamlessly into any space without disrupting the overall aesthetic.

Moreover, the PM200 and PM400 units are engineered for quiet operation, which is a crucial feature for both residential and commercial settings. Their design ensures that they do not become a source of distraction, allowing users to enjoy a comfortable environment without the accompanying noise often associated with traditional heating systems.

In summary, Vanguard Heating PM200 and PM400 models are excellent choices for those seeking reliable, efficient, and user-friendly heating solutions. With their range of features and technologies, they continue to set the standard in the heating industry, ensuring users enjoy optimal comfort in any setting.