Harman Stove Company The Harman Accentra Pellet Insert instruction

Installation12

Optional Wing Extensions

Connecting the cord retainer to the wing

Optional wing extensions are made for fireplace open- ings which are larger than the cast wing. The 3 piece wing extension is 48" wide by 34"high.

Custom oversized wing extensions can be purchased from Harman for any fireplace openings larger than the standard wing extension area.

These optional wing extensions will have a 1/2 inch re- turn bend as shown in fig. 20. Custom oversized wing extensions with a radius top can be ordered with a ra- dius of your choosing. These radius top wings WILL NOT have a return bend, although they will be made of thicker metal to reduce warpage.

With the three wing pieces completed, the cord re- tainer must be bolted to the bottom rear of the wing. Either left exit (shown in fig. 22) or right exit.

At the bottom rear edge of the right and left wing there is a small radius indent for the cord to exit between the wing and the fireplace face.

1/4-20 x 3/8 bottom head bolts (5/32" allen wrench)

Fig. 20

(5/32" allen wrench)

Fig. 22

5.The power cord can be installed exiting the left (standard) or right side of the surround. If a right side cord is desired, follow the instructions below.

Changing the cord exit location from the left side to the right side:

The cord is located on the left side, standard from Harman. (See fig 21.)

To route the cord to the right side:

•Cut the tyraps looping the cord to the left

•Reroute the cord along the top of the steel angle and

down the right side.

•Re-tyrap (not supplied by Harman) the wire through the notches provided in the mounting frame. Then down

the right side rail.

•Do not remove or move the cord retainer, it is made to reach both the right and left sides.

Ground

Ty-raps

Nothing can ex- tend beyond this face to the back side.

Fig. 21

DO NOT CUT.

Fig. 23

6.You must now decide whether to install the room sensor as a wall sensor or as a return air sensor. Harman highly recommends that the room sensor be installed. If you are installing the room sensor as a wall sensor, the long black 2 wire cable must be Ty-rapped to the powercord. This wire is long enough to reach the end of the power cord so the installer can reach past the hearth to the location where the extension wire (18/

2thermostat wire, not supplied by Harman) can be spliced to go to the wall location chosen for the room sensor.

The Harman Accentra Pellet Insert specifications

The Harman Stove Company is renowned for its high-quality heating solutions, and the Harman Accentra Pellet Insert exemplifies their commitment to efficiency and performance. Designed to seamlessly blend into existing fireplace openings, the Accentra Pellet Insert offers homeowners a reliable source of warmth while enhancing the aesthetics of their living space.

One of the standout features of the Accentra is its advanced pellet-burning technology. This insert utilizes a powerful feed system that ensures a consistent and controllable burn rate, leading to a more efficient heating experience. The patented Smart Control technology enables users to monitor and adjust the temperature easily, ensuring that every room is kept at the perfect temperature with minimal effort.

The Accentra Pellet Insert also comes equipped with a user-friendly interface, making it accessible even for those unfamiliar with pellet stoves. Its LCD screen displays vital information, including temperature settings and fuel levels, allowing users to make informed adjustments. This level of convenience is complemented by the unit's automatic ignition feature, which simplifies startup, eliminating the need for matches or manual lighting.

In terms of efficiency, the Harman Accentra boasts an impressive high-efficiency rating. With a heating capacity of up to 2,200 square feet, it provides substantial warmth, making it an ideal choice for larger homes or open spaces. The insert’s environmentally-friendly design minimizes emissions, contributing to cleaner air and promoting sustainable heating practices.

The construction of the Accentra Pellet Insert is equally impressive. Built with durable materials, it is designed for longevity and dependability. The insert's sleek and contemporary design fits neatly into a variety of home decors, allowing homeowners to enjoy a cozy fire without sacrificing style.

Another key characteristic of the Accentra Pellet Insert is its versatility in fuel options. Users can choose from various brands of pellets, optimizing fuel choices based on availability and pricing. With a large capacity hopper, the Accentra can hold ample pellets, reducing the frequency of refueling and allowing for extended burn times.

In summary, the Harman Accentra Pellet Insert embodies the company's dedication to quality and innovation. With its efficient heating capabilities, advanced technology, user-centric design, and adaptability, it stands out as a premium choice for anyone looking to enhance their home’s heating system while enjoying the comforting glow of a real fire. Investing in the Harman Accentra is not just a choice for warmth; it's a commitment to quality, aesthetics, and sustainable living.