LOG GRATE PLACEMENT
PROPER INSTALLATION SEQUENCE:
VFSR and VFSV-(16, 18, 24, 30)C (Figure 12)
1. Place two (2) log grates onto two (2) left, front pins and two
(2)right, front pins on burner pan.Secure grates with two (2) Tinnerman clips.
Attention: Log grates, lava rock and rock wool will not be used with Flame Art log sets.
Figure 12
PLACEMENT OF GLOWING EMBERS AND LAVA ROCK
Placement of the glowing embers (rock wool) is very individual and light coverage of the areas indicated will provide your best effects. We recommend separation of the rock wool by hand and make your coverage as light and fluffy as possible.
Place just enough embers on the burner to obtain the glow and a gold, yellow flame.
Do not place embers (rock wool) over large ports in rear portion of burner.
A thin layer of glowing embers (rock wool) should be placed under open space between the right and left middle logs.
Rock wool should not be placed in the area of the pilot assembly.
Placing Lava Rock in Front of Grate and Burner Pan on Fire- place Floor
Spread lava rocks on fireplace floor in front of grate and burner pan. The lava rocks are for decorative effect and are not required for fireplace operation.
ATTENTION: DO NOT PLACE LAVA ROCKS ON LOGS OR ROCK WOOL. THE LAVA ROCKS SHOULD ONLY BE PLACED ON THE FIREPLACE FLOOR.
Page 12 |