GE Concord 4 manual Fire Panic Alarm, Police Panic Alarm, Auxiliary Panic Alarm, Siren Time-out

Page 22

Note

Verify with your installer how your keychain touchpads are programmed. See “Appen- dix A: Keychain Touchpads” for more information.

ately. A panic alarm can be activated in any arming level. Each type of panic alarm sounds and reacts differently when activated.

 

Type of Alarm

Alarm Sound

 

 

 

 

 

 

Fire

Repeating series of three beeps

 

 

 

 

 

 

Police

Continuous tone

 

 

 

 

 

 

Auxiliary

Rapid beeps

 

 

 

 

Fire Panic Alarm

The Fire panic alarm sounds from all interior and exterior sirens. On monitored systems, the cen- tral monitoring station responds by calling the fire department.

To activate a Fire panic alarm from a touchpad:

Press and hold both Fire button(s) for 2 seconds.

Lighting During a Fire Panic Alarm

If your system includes controlled lighting, all system lights turn on and remain on during a Fire alarm.

Police Panic Alarm

The Police panic alarm sounds from all interior and exterior sirens, scaring off any intruder and alerting neighbors. On monitored systems, the central monitoring station responds by calling the police.

To activate a Police panic alarm from a touchpad:

Press and hold the Police button(s) for 2 seconds.

To activate a Police panic alarm from a keychain touchpad:

Press and hold the Lock and Unlock buttons together for 2 seconds.

Lighting During a Police Panic Alarm

If your system includes controlled lighting, all system lights flash continuously during a Police panic alarm.

Auxiliary Panic Alarm

The Auxiliary panic alarm sounds from interior sirens only. It is typically set up by your security dealer, based on your specific needs. On monitored systems, the central station responds by call- ing the service or agency you specified through your dealer, such as an ambulance service.

To activate an Auxiliary panic alarm from a touchpad:

Press and hold the Auxiliary button(s) for 2 seconds.

To send an Auxiliary panic alarm from a keychain touchpad:

Press and hold the Lights and Star buttons together for 2 seconds.

Lighting During an Auxiliary Panic Alarm

If your system includes controlled lighting, all system lights turn on and remain on during an Auxiliary panic alarm.

Siren Time-out

If the system is not disarmed after an alarm, the sirens will continue to sound until the time-out period is reached. The time-out period can only be programmed by your installer or dealer.

12

Concord 4 Series Security Systems

Page 21 Page 23
Image 22
Page 21 Page 23
Contents User guide FCC Part 15 Information to the User Disarm the system Cancel an accidental alarmSend a police alarm Arm to Level 2-STAYConcord 4 Series Security Systems Contents Using the Energy Saver Feature Panic AlarmsAccess Codes Notification by PagerNotify by Exception Advanced Light ControlLatchkey Paging Multiple Day RolloverTroubleshooting Using a Touchtone Phone to Operate Your SystemTesting the System Macro Keys System Information Viewing the Event BufferAppendix B Planning for Emergencies Appendix C Programming Your SystemInstallation Instructions Getting to Know Your Security System Communicating with the System Instructing the SystemKey Beeps Beeps and LEDs- How Your System Talks to YouNotification by Pager Status BeepsAutomatic and Manual Fire Alarms What Happens in an Alarm ConditionFire Alarms Basic System OperationsGuidelines for Preventing Accidental Alarms Preventing Accidental AlarmsClearing Alarms and Resetting Smoke Detectors Press and hold bothLevel 1-OFF Aborting Accidental AlarmsArming and Disarming Your System Press the Unlock buttonQuick Arm Level 2-STAYLevel 3-AWAY Quick ExitNo Delay-For Instant Alarm Using the Chime FeatureUsing the Voice Chime Feature Keychain Touchpad ArmingArming Your System Silently Auto Stay Arming FeatureExit Extension Arming Feature Bypassing-Arming With a Door or Window OpenWas the Bypass Successful? Basic Light ControlBypassing a Sensor Indirectly Close bypassed doors and/or windows Arm your system againShort System Status Basic Output ControlChecking the Status of Your System Full System StatusAuxiliary Panic Alarm Fire Panic AlarmPolice Panic Alarm Siren Time-outProgramming Access Codes Changing or Erasing User Codes Assigning Code AttributesTime and Date SettingChange it when necessary Assigning the System Test AttributeAdjusting the System Status Voice Volume Adjusting System Sounds Touchpad BrightnessAdjusting the Touchpad Beeps Fixed Display Touchpad Only Adjusting the Touchpad Display BrightnessSetting the Energy Saver High and Low Temperature Settings Using Energy Saver FeatureEnergy Saver Example Temperature settings can range from 45 to 90 Fahrenheit Energy Saver SetpointsEvent Code This number identifies who or what is causing the eventPager Messages This number identifies what has happenedStreamlining the Page Report Creating Time SchedulesAccount Number Scheduling Consecutive DaysAttaching Time Schedules Multiple Day RolloverControlling Lights By Time Schedule Time Schedules and PartitionsControlling Lights with Sensors Arming Installer Programmable LightingScheduled Controlling Outputs by Time ScheduleOpening Closing ReportsAssigning a Time Schedule to Latchkey Paging Latchkey OpeningLatchkey Closing Basic Latchkey OpeningApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Partition-Specific Settings Using a PartitionedGlobal Settings Jumping PartitionsArming and Disarming Another Partition Arming and Disarming Multiple Partitions at the Same TimeProgramming Another Partition Macro Keys Press the Lock buttonEvent Buffer ViewingOverview AC Power Failure User information is shown in the following table UnbypassedAccessing the System from Off-site Phone Command PrefixSource information is shown in the following table How the Panel Answers the Phone Codes with Remote Access CapabilityTouchtone Phone System Operation Phone operation of your system involves 2 stepsActivating a Police Panic Alarm Activate OutputsManual Tests Automatic Test FeaturesPhone Questions? Sensor TestPhone Communication Test Trouble Beeps and Trouble Messages TroubleshootingTesting Sirens Silencing Trouble BeepsPhone Issues Common Questions and AnswersLighting Issues Auxiliary Phone Trou System Sensors HW / WL / TPUser Codes There are keychain touchpads in use in the system On/OffActive for Partition 1 2 3 4 5 Latchkey User Y N Keychain Touchpad System Features Accidental Smoke and Fire AlarmsDoors and Delay Time Settings Dialer AbortNo. My system does not use this feature If the Power Goes OutResetting the Smoke Detector No Activity TimePaging LightsOutputs Energy SaverEntry Delay Alarm Sounds and Status BeepsOr 3 beeps indicating set arming level Appendix B Planning for Emergencies Floor Plan ExampleYour Floor Plan Floor Plan Alarm System Limitations If Your System Needs ServiceAppendix C Programming Your System Using Programming MenusExamples of Programming Using Menus Two Methods to Program Your SystemTo erase a user code Using Programming Shortcuts + 05XX4 + 1off or 2on + # + 05XX2 + 1off or 2on + #+ 05XX3 + 1off or 2on + # + 05XX5 + 1off or 2on + #Output Attaching schedules for Output 2 operation Sched 15 * + 065115 + 1off or 2on + #+ 065201 + 1off or 2on + # Enter temperature value in Fahrenheit+ 065200 + 1off or 2on + # Output Attaching schedules for Output 4 operationUnderlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.
Top Page Image Contents