GE Concord 4 manual If the Power Goes Out, No Activity Time, Resetting the Smoke Detector

Page 57

If the Power Goes Out

Your system has a backup battery that keeps your system operational during a power failure. An optional feature allows your system to alert the central monitoring station if the power is off for 15 - 45 minutes. It reports again when power has been restored.

No Activity Time

Ptn.

No Activity Feature

 

 

1

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

2

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

3

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

4

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

5

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

6

Yes. If there is no activity in my system for ____ hours (1-42, default 24),

 

the system will send a No Activity report to the central station.

 

No. My system does not use this feature.

 

 

Resetting the Smoke Detector

To reset smoke detectors:

They are reset automatically.

Press the reset switch.

Enter Disarm command twice.

System Information

System Information

Code

 

 

Factory code

System number

System level

Software version

Concord 4 Series Security Systems

47

Image 57
Contents User guide FCC Part 15 Information to the User Send a police alarm Cancel an accidental alarmDisarm the system Arm to Level 2-STAYConcord 4 Series Security Systems Contents Access Codes Panic AlarmsUsing the Energy Saver Feature Notification by PagerLatchkey Paging Advanced Light ControlNotify by Exception Multiple Day RolloverTesting the System Using a Touchtone Phone to Operate Your SystemTroubleshooting Macro Keys System Information Viewing the Event BufferAppendix C Programming Your System Appendix B Planning for EmergenciesInstallation Instructions Getting to Know Your Security System Instructing the System Communicating with the SystemNotification by Pager Beeps and LEDs- How Your System Talks to YouKey Beeps Status BeepsFire Alarms What Happens in an Alarm ConditionAutomatic and Manual Fire Alarms Basic System OperationsClearing Alarms and Resetting Smoke Detectors Preventing Accidental AlarmsGuidelines for Preventing Accidental Alarms Press and hold bothArming and Disarming Your System Aborting Accidental AlarmsLevel 1-OFF Press the Unlock buttonLevel 3-AWAY Level 2-STAYQuick Arm Quick ExitUsing the Voice Chime Feature Using the Chime FeatureNo Delay-For Instant Alarm Keychain Touchpad ArmingExit Extension Arming Feature Auto Stay Arming FeatureArming Your System Silently Bypassing-Arming With a Door or Window OpenBypassing a Sensor Indirectly Basic Light ControlWas the Bypass Successful? Close bypassed doors and/or windows Arm your system againChecking the Status of Your System Basic Output ControlShort System Status Full System StatusPolice Panic Alarm Fire Panic AlarmAuxiliary Panic Alarm Siren Time-outProgramming Access Codes Assigning Code Attributes Changing or Erasing User CodesChange it when necessary SettingTime and Date Assigning the System Test AttributeAdjusting the Touchpad Beeps Fixed Display Touchpad Only Adjusting System Sounds Touchpad BrightnessAdjusting the System Status Voice Volume Adjusting the Touchpad Display BrightnessUsing Energy Saver Feature Setting the Energy Saver High and Low Temperature SettingsEnergy Saver Example Energy Saver Setpoints Temperature settings can range from 45 to 90 FahrenheitPager Messages This number identifies who or what is causing the eventEvent Code This number identifies what has happenedAccount Number Creating Time SchedulesStreamlining the Page Report Scheduling Consecutive DaysMultiple Day Rollover Attaching Time SchedulesTime Schedules and Partitions Controlling Lights By Time ScheduleControlling Lights with Sensors Scheduled Installer Programmable LightingArming Controlling Outputs by Time ScheduleClosing Reports OpeningLatchkey Closing Latchkey OpeningAssigning a Time Schedule to Latchkey Paging Basic Latchkey OpeningApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Global Settings Using a PartitionedPartition-Specific Settings Jumping PartitionsArming and Disarming Multiple Partitions at the Same Time Arming and Disarming Another PartitionProgramming Another Partition Press the Lock button Macro KeysViewing Event BufferOverview AC Power Failure Unbypassed User information is shown in the following tablePhone Command Prefix Accessing the System from Off-siteSource information is shown in the following table Touchtone Phone System Operation Codes with Remote Access CapabilityHow the Panel Answers the Phone Phone operation of your system involves 2 stepsActivate Outputs Activating a Police Panic AlarmPhone Questions? Automatic Test FeaturesManual Tests Sensor TestPhone Communication Test Testing Sirens TroubleshootingTrouble Beeps and Trouble Messages Silencing Trouble BeepsCommon Questions and Answers Phone IssuesLighting Issues Auxiliary Phone Trou HW / WL / TP System SensorsUser Codes On/Off There are keychain touchpads in use in the systemActive for Partition 1 2 3 4 5 Latchkey User Y N Keychain Touchpad Doors and Delay Time Settings Accidental Smoke and Fire AlarmsSystem Features Dialer AbortResetting the Smoke Detector If the Power Goes OutNo. My system does not use this feature No Activity TimeLights PagingEnergy Saver OutputsAlarm Sounds and Status Beeps Entry DelayOr 3 beeps indicating set arming level Floor Plan Example Appendix B Planning for EmergenciesYour Floor Plan Floor Plan If Your System Needs Service Alarm System LimitationsExamples of Programming Using Menus Using Programming MenusAppendix C Programming Your System Two Methods to Program Your SystemTo erase a user code Using Programming Shortcuts + 05XX3 + 1off or 2on + # + 05XX2 + 1off or 2on + #+ 05XX4 + 1off or 2on + # + 05XX5 + 1off or 2on + #Sched 15 * + 065115 + 1off or 2on + # Output Attaching schedules for Output 2 operation+ 065200 + 1off or 2on + # Enter temperature value in Fahrenheit+ 065201 + 1off or 2on + # Output Attaching schedules for Output 4 operationUnderlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.