GE Concord 4 manual Accidental Smoke and Fire Alarms, Dialer Abort, Doors and Delay Time Settings

Page 56

Accidental Smoke and Fire Alarms

To silence the alarms and reset the sensor:

1.Press CODE or 1 + CODE, once to silence the alarm.

2.Press 1 + CODE, again to reset the smoke alarm.

Smoke and fire panic alarms cannot be cancelled and are always reported to the central station.

If, after disarming the system once, the system still thinks a sensor is open, disarm the system again.

In the event of an accidental smoke or fire alarm, follow these dealer instructions:

_________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

Dialer Abort

I have ____ seconds to cancel an accidental intrusion or auxiliary alarm before it is reported

to the central station.

Doors and Delay Time Settings

When the system is armed, enter and exit the premises only through designated delay doors. Entry Delay Time: The time allowed to enter the premises and disarm the system.

Exit Delay Time: The time allowed to leave the premises after arming the system.

 

Door Location

Ptn.

Entry Delay

Exit Delay

 

 

 

 

 

1

 

1

:

:

 

 

 

 

 

2

 

2

:

:

 

 

 

 

 

3

 

3

:

:

 

 

 

 

 

4

 

4

:

:

 

 

 

 

 

5

 

5

:

:

 

 

 

 

 

6

 

6

:

:

 

 

 

 

 

System Features

Feature

My system features include:

 

 

Quick Arm

Yes. Press the arming level desired.

 

No. Enter arming level, then access code.

 

 

Quick Exit

Yes. Press D and exit your armed premises through a delay door within 2

 

minutes.

 

No. I need to disarm my system in order to exit the premises.

 

 

Exit

Yes. If I re-enter the armed premises during the Exit Delay time, the panel

Extension

will restart the Exit Delay time.

 

No. If I re-enter the armed premises during the Exit Delay time, it will con-

 

tinue to count down and I must disarm the system.

 

 

Keyswitch

Yes. I can use a key to arm the system. The switch is located:

Arming

______________________________________________________________

 

 

No.

 

 

46

Concord 4 Series Security Systems

Page 55 Page 57
Image 56
Page 55 Page 57
Contents User guide FCC Part 15 Information to the User Cancel an accidental alarm Send a police alarmDisarm the system Arm to Level 2-STAYConcord 4 Series Security Systems Contents Panic Alarms Access CodesUsing the Energy Saver Feature Notification by PagerAdvanced Light Control Latchkey PagingNotify by Exception Multiple Day RolloverUsing a Touchtone Phone to Operate Your System Testing the SystemTroubleshooting Macro Keys System Information Viewing the Event BufferAppendix B Planning for Emergencies Appendix C Programming Your SystemInstallation Instructions Getting to Know Your Security System Communicating with the System Instructing the SystemBeeps and LEDs- How Your System Talks to You Notification by PagerKey Beeps Status BeepsWhat Happens in an Alarm Condition Fire AlarmsAutomatic and Manual Fire Alarms Basic System OperationsPreventing Accidental Alarms Clearing Alarms and Resetting Smoke DetectorsGuidelines for Preventing Accidental Alarms Press and hold bothAborting Accidental Alarms Arming and Disarming Your SystemLevel 1-OFF Press the Unlock buttonLevel 2-STAY Level 3-AWAYQuick Arm Quick ExitUsing the Chime Feature Using the Voice Chime FeatureNo Delay-For Instant Alarm Keychain Touchpad ArmingAuto Stay Arming Feature Exit Extension Arming FeatureArming Your System Silently Bypassing-Arming With a Door or Window OpenBasic Light Control Bypassing a Sensor IndirectlyWas the Bypass Successful? Close bypassed doors and/or windows Arm your system againBasic Output Control Checking the Status of Your SystemShort System Status Full System StatusFire Panic Alarm Police Panic AlarmAuxiliary Panic Alarm Siren Time-outProgramming Access Codes Changing or Erasing User Codes Assigning Code AttributesSetting Change it when necessaryTime and Date Assigning the System Test AttributeAdjusting System Sounds Touchpad Brightness Adjusting the Touchpad Beeps Fixed Display Touchpad OnlyAdjusting the System Status Voice Volume Adjusting the Touchpad Display BrightnessEnergy Saver Example Using Energy Saver FeatureSetting the Energy Saver High and Low Temperature Settings Temperature settings can range from 45 to 90 Fahrenheit Energy Saver SetpointsThis number identifies who or what is causing the event Pager MessagesEvent Code This number identifies what has happenedCreating Time Schedules Account NumberStreamlining the Page Report Scheduling Consecutive DaysAttaching Time Schedules Multiple Day RolloverControlling Lights with Sensors Time Schedules and PartitionsControlling Lights By Time Schedule Installer Programmable Lighting ScheduledArming Controlling Outputs by Time ScheduleOpening Closing ReportsLatchkey Opening Latchkey ClosingAssigning a Time Schedule to Latchkey Paging Basic Latchkey OpeningApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Using a Partitioned Global SettingsPartition-Specific Settings Jumping PartitionsProgramming Another Partition Arming and Disarming Multiple Partitions at the Same TimeArming and Disarming Another Partition Macro Keys Press the Lock buttonOverview ViewingEvent Buffer AC Power Failure User information is shown in the following table UnbypassedSource information is shown in the following table Phone Command PrefixAccessing the System from Off-site Codes with Remote Access Capability Touchtone Phone System OperationHow the Panel Answers the Phone Phone operation of your system involves 2 stepsActivating a Police Panic Alarm Activate OutputsAutomatic Test Features Phone Questions?Manual Tests Sensor TestPhone Communication Test Troubleshooting Testing SirensTrouble Beeps and Trouble Messages Silencing Trouble BeepsLighting Issues Common Questions and AnswersPhone Issues Auxiliary Phone Trou System Sensors HW / WL / TPUser Codes Active for Partition 1 2 3 4 5 Latchkey User Y N On/OffThere are keychain touchpads in use in the system Keychain Touchpad Accidental Smoke and Fire Alarms Doors and Delay Time SettingsSystem Features Dialer AbortIf the Power Goes Out Resetting the Smoke DetectorNo. My system does not use this feature No Activity TimePaging LightsOutputs Energy SaverOr 3 beeps indicating set arming level Alarm Sounds and Status BeepsEntry Delay Appendix B Planning for Emergencies Floor Plan ExampleYour Floor Plan Floor Plan Alarm System Limitations If Your System Needs ServiceUsing Programming Menus Examples of Programming Using MenusAppendix C Programming Your System Two Methods to Program Your SystemTo erase a user code Using Programming Shortcuts + 05XX2 + 1off or 2on + # + 05XX3 + 1off or 2on + #+ 05XX4 + 1off or 2on + # + 05XX5 + 1off or 2on + #Output Attaching schedules for Output 2 operation Sched 15 * + 065115 + 1off or 2on + #Enter temperature value in Fahrenheit + 065200 + 1off or 2on + #+ 065201 + 1off or 2on + # Output Attaching schedules for Output 4 operationUnderlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.
Top Page Image Contents