GE Concord 4 Latchkey Opening, Latchkey Closing, Assigning a Time Schedule to Latchkey Paging

Page 35

What Will the Pager Report?

For Latchkey Opening Reports, the page reports the arming level as 111 (1—OFF) and the user.

For Latchkey Closing Reports, the page reports the arming level as 222 (2—STAY) or 333 (3— AWAY), and the user that armed to that level. See “Notification By Pager”.

Latchkey Opening

The installer can set up Latchkey Opening for one of two types of use: Basic and Advanced.

Basic Latchkey Opening

If your system is set up for Basic Latchkey, there are two ways to send a Latchkey Opening page:

Based on Time Schedule Only

1.Assign the Latchkey Opening feature a time schedule. (This needs to be done only once.)

2.Arm the system.

3.Disarming of the system by a Latchkey-designated user within the assigned time schedule, sends an Opening page.

Based on Latchkey Modifier 6 Only

1.Arm the system, then press 6, or press the Lock button on a keychain touchpad after arming to 3—AWAY.

2.Disarming of the system by a Latchkey-designated user sends an Opening page, regardless of assigned time schedule:

Advanced Latchkey Opening

If your system is set up for Advanced Latchkey use, there is one way to send a Latchkey Opening page:

1.Assign the Latchkey Opening feature a time schedule. (This needs to be done only once.)

2.Arm the system, then press 6, or press the Lock button on a keychain touchpad after arming to 3—AWAY.

3.Disarming of the system by a Latchkey-designated user within the assigned time schedule, sends an Opening page:

In Advanced Latchkey use, paging is available only during the time schedule(s) that you assign to it.

Latchkey Closing

Latchkey Closing can be used alone, or in addition to Latchkey Opening.

1.Assign the Latchkey Closing feature a time schedule.

2.The system is disarmed.

3.Arming of the system by a Latchkey-designated user within the assigned time, schedule sends a Closing page:

A Touchtone phone can be used to set up Latchkey paging, but touchpads work much better because of their extensive feedback. See “Appendix C” for touchpad and phone programming instructions.

Assigning a Time Schedule to Latchkey Paging

Follow these steps to attach a time schedule to Latchkey Opening and/or Latchkey Closing. If you need assistance setting up a time schedule that fits your needs, see “Creating Time Sched- ules”.

Scheduling Latchkey Opening and/or Closing:

1.At an alphanumeric or fixed display touchpad, enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 0600 + #.

Concord 4 Series Security Systems

25

Page 34 Page 36
Image 35
Page 34 Page 36
Contents User guide FCC Part 15 Information to the User Arm to Level 2-STAY Cancel an accidental alarmSend a police alarm Disarm the systemConcord 4 Series Security Systems Contents Notification by Pager Panic AlarmsAccess Codes Using the Energy Saver FeatureMultiple Day Rollover Advanced Light ControlLatchkey Paging Notify by ExceptionMacro Keys System Information Viewing the Event Buffer Using a Touchtone Phone to Operate Your SystemTesting the System TroubleshootingAppendix C Programming Your System Appendix B Planning for EmergenciesInstallation Instructions Getting to Know Your Security System Instructing the System Communicating with the SystemStatus Beeps Beeps and LEDs- How Your System Talks to YouNotification by Pager Key BeepsBasic System Operations What Happens in an Alarm ConditionFire Alarms Automatic and Manual Fire AlarmsPress and hold both Preventing Accidental AlarmsClearing Alarms and Resetting Smoke Detectors Guidelines for Preventing Accidental AlarmsPress the Unlock button Aborting Accidental AlarmsArming and Disarming Your System Level 1-OFFQuick Exit Level 2-STAYLevel 3-AWAY Quick ArmKeychain Touchpad Arming Using the Chime FeatureUsing the Voice Chime Feature No Delay-For Instant AlarmBypassing-Arming With a Door or Window Open Auto Stay Arming FeatureExit Extension Arming Feature Arming Your System SilentlyClose bypassed doors and/or windows Arm your system again Basic Light ControlBypassing a Sensor Indirectly Was the Bypass Successful?Full System Status Basic Output ControlChecking the Status of Your System Short System StatusSiren Time-out Fire Panic AlarmPolice Panic Alarm Auxiliary Panic AlarmProgramming Access Codes Assigning Code Attributes Changing or Erasing User CodesAssigning the System Test Attribute SettingChange it when necessary Time and DateAdjusting the Touchpad Display Brightness Adjusting System Sounds Touchpad BrightnessAdjusting the Touchpad Beeps Fixed Display Touchpad Only Adjusting the System Status Voice VolumeEnergy Saver Example Using Energy Saver FeatureSetting the Energy Saver High and Low Temperature Settings Energy Saver Setpoints Temperature settings can range from 45 to 90 FahrenheitThis number identifies what has happened This number identifies who or what is causing the eventPager Messages Event CodeScheduling Consecutive Days Creating Time SchedulesAccount Number Streamlining the Page ReportMultiple Day Rollover Attaching Time SchedulesControlling Lights with Sensors Time Schedules and PartitionsControlling Lights By Time Schedule Controlling Outputs by Time Schedule Installer Programmable LightingScheduled ArmingClosing Reports OpeningBasic Latchkey Opening Latchkey OpeningLatchkey Closing Assigning a Time Schedule to Latchkey PagingApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Jumping Partitions Using a PartitionedGlobal Settings Partition-Specific SettingsProgramming Another Partition Arming and Disarming Multiple Partitions at the Same TimeArming and Disarming Another Partition Press the Lock button Macro KeysOverview ViewingEvent Buffer AC Power Failure Unbypassed User information is shown in the following tableSource information is shown in the following table Phone Command PrefixAccessing the System from Off-site Phone operation of your system involves 2 steps Codes with Remote Access CapabilityTouchtone Phone System Operation How the Panel Answers the PhoneActivate Outputs Activating a Police Panic AlarmSensor Test Automatic Test FeaturesPhone Questions? Manual TestsPhone Communication Test Silencing Trouble Beeps TroubleshootingTesting Sirens Trouble Beeps and Trouble MessagesLighting Issues Common Questions and AnswersPhone Issues Auxiliary Phone Trou HW / WL / TP System SensorsUser Codes Active for Partition 1 2 3 4 5 Latchkey User Y N On/OffThere are keychain touchpads in use in the system Keychain Touchpad Dialer Abort Accidental Smoke and Fire AlarmsDoors and Delay Time Settings System FeaturesNo Activity Time If the Power Goes OutResetting the Smoke Detector No. My system does not use this featureLights PagingEnergy Saver OutputsOr 3 beeps indicating set arming level Alarm Sounds and Status BeepsEntry Delay Floor Plan Example Appendix B Planning for EmergenciesYour Floor Plan Floor Plan If Your System Needs Service Alarm System LimitationsTwo Methods to Program Your System Using Programming MenusExamples of Programming Using Menus Appendix C Programming Your SystemTo erase a user code Using Programming Shortcuts + 05XX5 + 1off or 2on + # + 05XX2 + 1off or 2on + #+ 05XX3 + 1off or 2on + # + 05XX4 + 1off or 2on + #Sched 15 * + 065115 + 1off or 2on + # Output Attaching schedules for Output 2 operationOutput Attaching schedules for Output 4 operation Enter temperature value in Fahrenheit+ 065200 + 1off or 2on + # + 065201 + 1off or 2on + #Underlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.
Top Page Image Contents