GE Concord 4 manual Notify by Exception, Applying the Latchkey Modifier

Page 36

3.To schedule:

Latchkey Opening, press # when the touchpad displays “LATCHKEY OPENING” or “LATCH OPEN.”

Or, press B until the touchpad displays “LATCHKEY CLOSING” or “LATCH CLOSE,” then press #.

If you want a page to be sent every time Latchkey-designated user codes arm or disarm the system, apply the same time schedules under Latchkey Opening and Latchkey Closing.

4.The touchpad displays the first available time schedule.

5.Enter

2+ # to assign the time schedule to the event.

1+ # to make the time schedule inactive for the event.

6.Press # to secure your choice.

7.Press B to go to the next schedule and repeat step 5.

8.When you’ve finished attaching the desired time schedules, press * + 00 + # to exit the pro- gramming menus.

Applying the Latchkey Modifier

The Latchkey modifier (6) is pressed after the arming keypress sequence.

Applying the Latchkey modifier from a touchpad:

1.At any touchpad, press 2 3 + CODE + 6.

The touchpad displays, “LATCHKEY PAGER ON” or “PAGER ON.”

Note

6 must be pressed within 5 seconds of arming. If Quick Arm feature is on, an access code is not required. See “Quick Arm” for more infor- mation.

To apply the Latchkey modifier using a keychain touchpad:

Press the Lock button when the system is armed to level 3—AWAY.

Notify by Exception

The Notify by Exception feature allows programmed pager holders and/or the central station to be notified when arming or disarming occurs outside of specified time schedules.

Here are two specific examples of how the Notify by Exception feature might be used in a busi- ness setting:

•Every morning you’d like to be notified if your business is disarmed after its normal opening time.

•Every evening you’d like to be notified if your business is armed before its normal closing time.

Page In the Event of...

You can set up the Notify by Exception feature to page in the following instances:

•Send a page if the system is disarmed before the Opening time schedule begins or after the Opening time schedule has ended. (Exception Opening)

•Send a page if the system is armed before the Closing time schedule begins or after the Clos- ing time schedule has ended. (Exception Closing)

Who Will Be Paged?

Your system can call up to 5 different pager numbers to report an Open Exception and/or Closed Exception. You can request that the central station receive these two reports as well.

Refer to “Appendix A: User Sheets” to see which pagers have been set up to receive a page for this feature. Contact the installer if you would like to turn the Notify by Exception feature on or off for any programmed pager or the central station.

26

Concord 4 Series Security Systems

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User guide FCC Part 15 Information to the User Cancel an accidental alarm Send a police alarmDisarm the system Arm to Level 2-STAYConcord 4 Series Security Systems Contents Panic Alarms Access CodesUsing the Energy Saver Feature Notification by PagerAdvanced Light Control Latchkey PagingNotify by Exception Multiple Day RolloverUsing a Touchtone Phone to Operate Your System Testing the SystemTroubleshooting Macro Keys System Information Viewing the Event BufferAppendix B Planning for Emergencies Appendix C Programming Your SystemInstallation Instructions Getting to Know Your Security System Communicating with the System Instructing the SystemBeeps and LEDs- How Your System Talks to You Notification by PagerKey Beeps Status BeepsWhat Happens in an Alarm Condition Fire AlarmsAutomatic and Manual Fire Alarms Basic System OperationsPreventing Accidental Alarms Clearing Alarms and Resetting Smoke DetectorsGuidelines for Preventing Accidental Alarms Press and hold bothAborting Accidental Alarms Arming and Disarming Your SystemLevel 1-OFF Press the Unlock buttonLevel 2-STAY Level 3-AWAYQuick Arm Quick ExitUsing the Chime Feature Using the Voice Chime FeatureNo Delay-For Instant Alarm Keychain Touchpad ArmingAuto Stay Arming Feature Exit Extension Arming FeatureArming Your System Silently Bypassing-Arming With a Door or Window OpenBasic Light Control Bypassing a Sensor IndirectlyWas the Bypass Successful? Close bypassed doors and/or windows Arm your system againBasic Output Control Checking the Status of Your SystemShort System Status Full System StatusFire Panic Alarm Police Panic AlarmAuxiliary Panic Alarm Siren Time-outProgramming Access Codes Changing or Erasing User Codes Assigning Code AttributesSetting Change it when necessaryTime and Date Assigning the System Test AttributeAdjusting System Sounds Touchpad Brightness Adjusting the Touchpad Beeps Fixed Display Touchpad OnlyAdjusting the System Status Voice Volume Adjusting the Touchpad Display BrightnessUsing Energy Saver Feature Setting the Energy Saver High and Low Temperature SettingsEnergy Saver Example Temperature settings can range from 45 to 90 Fahrenheit Energy Saver SetpointsThis number identifies who or what is causing the event Pager MessagesEvent Code This number identifies what has happenedCreating Time Schedules Account NumberStreamlining the Page Report Scheduling Consecutive DaysAttaching Time Schedules Multiple Day RolloverTime Schedules and Partitions Controlling Lights By Time ScheduleControlling Lights with Sensors Installer Programmable Lighting ScheduledArming Controlling Outputs by Time ScheduleOpening Closing ReportsLatchkey Opening Latchkey ClosingAssigning a Time Schedule to Latchkey Paging Basic Latchkey OpeningApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Using a Partitioned Global SettingsPartition-Specific Settings Jumping PartitionsArming and Disarming Multiple Partitions at the Same Time Arming and Disarming Another PartitionProgramming Another Partition Macro Keys Press the Lock buttonViewing Event BufferOverview AC Power Failure User information is shown in the following table UnbypassedPhone Command Prefix Accessing the System from Off-siteSource information is shown in the following table Codes with Remote Access Capability Touchtone Phone System OperationHow the Panel Answers the Phone Phone operation of your system involves 2 stepsActivating a Police Panic Alarm Activate OutputsAutomatic Test Features Phone Questions?Manual Tests Sensor TestPhone Communication Test Troubleshooting Testing SirensTrouble Beeps and Trouble Messages Silencing Trouble BeepsCommon Questions and Answers Phone IssuesLighting Issues Auxiliary Phone Trou System Sensors HW / WL / TPUser Codes On/Off There are keychain touchpads in use in the systemActive for Partition 1 2 3 4 5 Latchkey User Y N Keychain Touchpad Accidental Smoke and Fire Alarms Doors and Delay Time SettingsSystem Features Dialer AbortIf the Power Goes Out Resetting the Smoke DetectorNo. My system does not use this feature No Activity TimePaging LightsOutputs Energy SaverAlarm Sounds and Status Beeps Entry DelayOr 3 beeps indicating set arming level Appendix B Planning for Emergencies Floor Plan ExampleYour Floor Plan Floor Plan Alarm System Limitations If Your System Needs ServiceUsing Programming Menus Examples of Programming Using MenusAppendix C Programming Your System Two Methods to Program Your SystemTo erase a user code Using Programming Shortcuts + 05XX2 + 1off or 2on + # + 05XX3 + 1off or 2on + #+ 05XX4 + 1off or 2on + # + 05XX5 + 1off or 2on + #Output Attaching schedules for Output 2 operation Sched 15 * + 065115 + 1off or 2on + #Enter temperature value in Fahrenheit + 065200 + 1off or 2on + #+ 065201 + 1off or 2on + # Output Attaching schedules for Output 4 operationUnderlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.
Top Page Image Contents