GE Concord 4 manual Using a Partitioned, Global Settings, Partition-Specific Settings

Page 38

Note

Before allowing any down- load sessions, the system must be disarmed to level 1—OFF.

•Back up data from your system.

•Allow your dealer to quickly implement requested programming changes.

To enable/disable the Panel Download setting:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 041.

3.To turn Downloading:

on, press 2 + #. The dealer will be able to access your system remotely if necessary. off, press 1 + #. The dealer will not be able to access your system remotely.

4.Press * + 00 + # to exit the programming menus.

Using a

Partitioned

System (Concord 4 systems only)

Concord 4 systems can be set up by your installer to operate as a multiple-partitioned system. Partitioned systems provide security for up to six individual customers or areas of a building from a single control panel. Partitioned systems are useful in strip malls or multi-family housing.

Global Settings

Global system settings affect all partitions. Most are set by the installer. Global settings that are programmed by the user include:

•Time and Date

•System Master code

Partition-Specific Settings

Partition-specific settings affect only one partition. User-programmable, partition-specific set- tings include:

•6 Partition Master codes (1 per partition)

•230 Regular User codes (total for all partitions combined)

•16 time schedules (total for all partitions combined)

•9 Advanced Light Control set-ups available to each partition

•Latchkey feature

•Notify by Exception feature

•Scheduled Arming feature

•Speaker volume settings

•Energy Saver feature and its high and low setpoints.

To program any of these features for another partition, you must enter the User Programming menu from a touchpad in that partition, or jump into that partition, then enter the User Program- ming menu.

Note

If your system uses just one partition, skip this section.

Jumping Partitions

Typically, you would operate Partition 1 from a touchpad within Partition 1. However, if you have access to Partition 3 and want to avoid walking a long distance to a Partition 3 touchpad, you can access Partition 3 from the Partition 1 touchpad by jumping partitions. Depending on how your installer programmed your system, you may or may not have to enter an access code to jump partitions.

The ability to jump to another partition is an attribute you assign to each user code (see “Assign- ing Code Attributes”). Each code has unique partition number assignments that it can control. By default, the System Master is the only code that can jump partitions. Refer to the “Appendix A:

User Sheets” to see if any other access codes have the ability to jump partitions.

28

Concord 4 Series Security Systems

Page 37 Page 39
Image 38
Page 37 Page 39
Contents User guide FCC Part 15 Information to the User Disarm the system Cancel an accidental alarmSend a police alarm Arm to Level 2-STAYConcord 4 Series Security Systems Contents Using the Energy Saver Feature Panic AlarmsAccess Codes Notification by PagerNotify by Exception Advanced Light ControlLatchkey Paging Multiple Day RolloverTroubleshooting Using a Touchtone Phone to Operate Your SystemTesting the System Macro Keys System Information Viewing the Event BufferAppendix B Planning for Emergencies Appendix C Programming Your SystemInstallation Instructions Getting to Know Your Security System Communicating with the System Instructing the SystemKey Beeps Beeps and LEDs- How Your System Talks to YouNotification by Pager Status BeepsAutomatic and Manual Fire Alarms What Happens in an Alarm ConditionFire Alarms Basic System OperationsGuidelines for Preventing Accidental Alarms Preventing Accidental AlarmsClearing Alarms and Resetting Smoke Detectors Press and hold bothLevel 1-OFF Aborting Accidental AlarmsArming and Disarming Your System Press the Unlock buttonQuick Arm Level 2-STAYLevel 3-AWAY Quick ExitNo Delay-For Instant Alarm Using the Chime FeatureUsing the Voice Chime Feature Keychain Touchpad ArmingArming Your System Silently Auto Stay Arming FeatureExit Extension Arming Feature Bypassing-Arming With a Door or Window OpenWas the Bypass Successful? Basic Light ControlBypassing a Sensor Indirectly Close bypassed doors and/or windows Arm your system againShort System Status Basic Output ControlChecking the Status of Your System Full System StatusAuxiliary Panic Alarm Fire Panic AlarmPolice Panic Alarm Siren Time-outProgramming Access Codes Changing or Erasing User Codes Assigning Code AttributesTime and Date SettingChange it when necessary Assigning the System Test AttributeAdjusting the System Status Voice Volume Adjusting System Sounds Touchpad BrightnessAdjusting the Touchpad Beeps Fixed Display Touchpad Only Adjusting the Touchpad Display BrightnessEnergy Saver Example Using Energy Saver FeatureSetting the Energy Saver High and Low Temperature Settings Temperature settings can range from 45 to 90 Fahrenheit Energy Saver SetpointsEvent Code This number identifies who or what is causing the eventPager Messages This number identifies what has happenedStreamlining the Page Report Creating Time SchedulesAccount Number Scheduling Consecutive DaysAttaching Time Schedules Multiple Day RolloverControlling Lights with Sensors Time Schedules and PartitionsControlling Lights By Time Schedule Arming Installer Programmable LightingScheduled Controlling Outputs by Time ScheduleOpening Closing ReportsAssigning a Time Schedule to Latchkey Paging Latchkey OpeningLatchkey Closing Basic Latchkey OpeningApplying the Latchkey Modifier Assigning a Time Schedule to Exception Opening and Closing Partition-Specific Settings Using a PartitionedGlobal Settings Jumping PartitionsProgramming Another Partition Arming and Disarming Multiple Partitions at the Same TimeArming and Disarming Another Partition Macro Keys Press the Lock buttonOverview ViewingEvent Buffer AC Power Failure User information is shown in the following table UnbypassedSource information is shown in the following table Phone Command PrefixAccessing the System from Off-site How the Panel Answers the Phone Codes with Remote Access CapabilityTouchtone Phone System Operation Phone operation of your system involves 2 stepsActivating a Police Panic Alarm Activate OutputsManual Tests Automatic Test FeaturesPhone Questions? Sensor TestPhone Communication Test Trouble Beeps and Trouble Messages TroubleshootingTesting Sirens Silencing Trouble BeepsLighting Issues Common Questions and AnswersPhone Issues Auxiliary Phone Trou System Sensors HW / WL / TPUser Codes Active for Partition 1 2 3 4 5 Latchkey User Y N On/OffThere are keychain touchpads in use in the system Keychain Touchpad System Features Accidental Smoke and Fire AlarmsDoors and Delay Time Settings Dialer AbortNo. My system does not use this feature If the Power Goes OutResetting the Smoke Detector No Activity TimePaging LightsOutputs Energy SaverOr 3 beeps indicating set arming level Alarm Sounds and Status BeepsEntry Delay Appendix B Planning for Emergencies Floor Plan ExampleYour Floor Plan Floor Plan Alarm System Limitations If Your System Needs ServiceAppendix C Programming Your System Using Programming MenusExamples of Programming Using Menus Two Methods to Program Your SystemTo erase a user code Using Programming Shortcuts + 05XX4 + 1off or 2on + # + 05XX2 + 1off or 2on + #+ 05XX3 + 1off or 2on + # + 05XX5 + 1off or 2on + #Output Attaching schedules for Output 2 operation Sched 15 * + 065115 + 1off or 2on + #+ 065201 + 1off or 2on + # Enter temperature value in Fahrenheit+ 065200 + 1off or 2on + # Output Attaching schedules for Output 4 operationUnderlinedsetingsindicate Defaults Defaults

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.
Top Page Image Contents