GE 60-639-43-EUR-OD, 60-639-95R-OD manual Product Summary, Indoor Installation Guidelines

Page 1

)

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿*(￿,QWHUORJL[

,QGRRU￿2XWGRRU￿3,5￿0RWLRQ 6HQVRUV

,QVWDOODWLRQ￿,QVWUXFWLRQV

'RFXPHQW￿1XPEHU￿￿￿￿￿￿￿￿￿￿￿5HY￿￿( 1RYHPEHU￿￿￿￿￿

Product

Summary

.

Model Nos.

A passive-infrared (PIR) motion sensor detects movement within a specific area by sensing the infrared energy emitted from a body as it moves across the sensor’s field of view. When this motion is detected, the sensor transmits an alarm signal to the control panel.

Use the indoor motion sensor to protect locations where door/window sensors are impractical or not needed. For example, use a motion sensor to protect large areas or open floor plans. Motion sensors also provide backup protection for door/window sensors.

Use the outdoor motion sensor to identify motion in a protected outdoor area. Detected motion in this protected area can sound chimes or turn on outside lights.

Note

Do not use outdoor motion sensors for intrusion protection.

60-639-95R

60-639-95R-OD

60-639-43-EUR

60-639-43-EUR-OD

The wireless motion sensor includes the following features:

35 feet by 40 feet coverage area for standard and optional animal alley lenses

Masking kit provided to block portions of the coverage area

Three minute transmitter lockout time after an alarm, helping to extend battery life

Cover-activated tamper (optional wall-activated tamper is included)

Supervisory signals transmitted every 64 minutes to the control panel

Sensor low battery reports (trouble) to the control panel

Field-selectable sensitivity options

Installation

Indoor Installation Guidelines

 

Use the following guidelines for installing indoor motion sensors.

 

• If possible, locate sensors within 100 feet of the panel. While a transmitter may have a range

 

of 500 feet or more out in the open, the environment at the installation site can have a signif-

 

icant effect on transmitter range. Sometimes a change in sensor location can help overcome

 

adverse wireless conditions.

 

• The recommended mounting height is 7 1/2 feet, but the sensor can be mounted from 5 to 8

 

feet high in the corner of the area you want to protect. See the animal alley lens guidelines for

 

mounting the optional animal alley lens. Higher mounting provides better range (up to 35

 

feet), and lower mounting provides better protection close to the motion sensor (see Figures

 

2 and 3). The optional swivel mount (part #60-737) can be used for difficult mounting loca-

 

tions.

 

• Position the sensor to protect an area where an intruder would be most likely to walk across

 

the detection pattern (see Figure 1).

 

• Mount the motion sensor on a rigid surface which is free from vibrations.

 

• Do not aim the sensor at windows, fireplaces, air conditioners, area heaters, forced air heat-

 

ing vents, or place it in direct sunlight. Sudden changes in temperature may trigger a false

 

alarm from these devices.

 

• Do not mount the sensor near duct work or other large metallic surfaces which may affect the

 

RF signals (see RF Testing). Actual acceptable transmitter range should be verified for each

 

installation.

 

• Mount the sensor permanently on a flat wall or in a corner. Do not set it on a shelf.

 

• Windows should be closed in any area which has an armed motion sensor.

 

• A pet will trigger a motion sensor. See animal alley lens guidelines to use a motion sensor

 

when pets are present.

 

• Mount the motion sensor on an insulated, outside wall facing in.

 

• Position the sensor so it faces a solid reference point, like a wall.

1

Image 1
Contents Indoor Installation Guidelines InstallationProduct Summary Mounting Outdoor Installation Guidelines Use the following procedure to mount the sensor Setting the Sensitivity Indoor Motion Sensor Lens ReplacementAnimal Alley Lens Guidelines Outdoor Motion Sensor TestingCoverage MaskingMaintenance Final TestingProgramming Replacing BatteriesDeclaration of Conformity SpecificationsMeans of Conformity Approved for use in the countries marked with a check

60-639-95R, 60-639-43-EUR, 60-639-43-EUR-OD, 60-639-95R-OD specifications

The GE 60-639-43-EUR-OD and its associated models, including the 60-639-43-EUR, 60-639-95R, and 60-639-95R-OD, represent a significant advancement in engineering solutions from General Electric, designed to meet diverse industrial needs. These models are recognized for their robust functionality and reliability in demanding operational environments.

One of the main features of these models is their versatility in application. They are engineered to cater to a variety of sectors including manufacturing, transportation, and energy. Their adaptability allows them to be seamlessly integrated into existing systems, offering enhanced performance without requiring extensive modifications.

The GE 60-639 series is fortified with advanced technologies that enhance efficiency and productivity. Key among these technologies is their use of smart monitoring systems, which provide real-time data and insights into performance metrics. This feature not only aids in predictive maintenance, minimizing downtime but also optimizes the overall workflow.

In terms of characteristics, these models are designed with a focus on energy efficiency. They utilize innovative power management technologies that reduce energy consumption while maintaining peak performance. This not only lowers operational costs but also aligns with global sustainability efforts aimed at reducing carbon footprints.

Moreover, the build quality of the GE 60-639 series is exceptional. They are constructed using high-grade materials that ensure durability and resilience against harsh operational conditions. This ruggedness translates into longer service life and lower replacement costs, making them a wise investment for businesses.

The user interface of these models is intuitive, allowing for easy operation and management. With streamlined controls and comprehensive diagnostic features, users can effectively monitor and manage system performance with minimal training.

In conclusion, the GE 60-639-43-EUR-OD, along with its counterparts, exemplifies GE’s commitment to innovation and reliability. With their versatile application, advanced technologies for efficiency, and robust construction, these models stand out as ideal solutions for modern industrial challenges. Organizations looking to enhance their operational capabilities would benefit significantly from integrating these reliable systems into their operations.