GE 60-875 manual Option 43 Pager Phone Number, Panel will call the pager to indicate the following

Page 24

Note

The phone number is auto- matically stored after you’ve pressed 26 digits. You will not have to press DONE to store the number. If the number is less than 26 dig- its, then DONE must be pressed.

2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.

3.Press Delete from the Start menu. Panel announces, Select from main menu

4.Press Option #. Panel announces, Option 1, press again for next option or done to select.

5.Press 42. Panel announces, Option 42, press again for next option or done to delete.

6.Press DONE. Panel announces, Option 42 deleted.

Option 43 - Pager Phone Number

Add enables the pager phone number and allows you to program up to 26 digits, includ- ing pauses.

Add 3 or 4 pauses to the end of the phone number to ensure the complete pager message will be received. Press the Test button to program a pause into the phone number.

1.Open panel cover. Panel announces, Use numbered keys to enter ID.

2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.

3.Press Add from the Start menu. Panel announces, Select from main menu

4.Press Option #. Panel announces, Option 1, press again for next option or done to select.

5.Press 43. Panel announces, Option 43, press again for next option or use numbered keys to enter phone number, then press done.

6.Enter a phone number with the numbered keys. Press Test to enter a pause in the phone number, press Add to enter a “*”, and press Delete to enter a “#”. Panel announces each number selected.

7.Press DONE. Panel confirms entered phone number.

Delete disables the pager phone number. The phone number will not be called in an alarm situation.

1.Open panel cover. Panel announces, Use numbered keys to enter ID.

2.Enter Access Code using the numbered keys. Panel announces, Please select from Start Menu.

3.Press Delete from the Start menu. Panel announces, Select from main menu

4.Press Option #. Panel announces, Option 1, press again for next option or done to select.

5.Press 43. Panel announces, Option 43, press again for next option or done to delete.

6.Press DONE. Panel announces, Option 43 deleted.

The panel will call the pager to indicate the following:

•No activity - A no activity alarm is called in if the programmed amount of time passes, and no activity has occurred on your system. Examples of such are: the panel is not subdisarmed, disarmed, sensors armed, a key has not been pressed or a sensor has not been tripped. Tripping of non-intrusion chime sensors is not consid- ered activity. The no activity time period is programmed by your installer.

•Latchkey - A latchkey report is called when the system is not disarmed by a prede- termined time. The latchkey time is programmed by the user (Option 03). Latchkey must be enabled when arming.

•Phone Test - A phone test report is called in when a phone test has been performed.

•Disarming - A disarming report is called in when the system is disarmed. This option is programmed by your installer.

•Arming - An arming report is called in when the system is armed. This option is programmed by your installer.

•Fail to Disarm - A fail to disarm report is called in when the system is not dis- armed by the time programmed by the installer.

•Fail to Arm - A fail to arm report is called in when the system is not armed by the time programmed by the installer.

19

Simon Security System

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Simon Security System FCC Notices FCC Part 15 Information to the UserCanada Notice Contents Testing Introduction to Your Security System Security System ComponentsHow You Communicate to Your System How to Use Your Control Panel Quick Exit LatchkeySubdisarm Disarming Your System Subdisarm Your SystemChime Doors Chime Special MotionDirect Bypassing Direct UnbypassingHow Your SystemCommunicates To YouAlarm Sirens and Lamp Modules Alarm Siren and X10 Light InformationStatus Beeps Status BeepsCanceling Preventing Accidental Alarms Panel Indicator LightsCanceling Accidental Alarms Numeric PagerHow to Use an Off-Site Phone Guidelines for Preventing Accidental AlarmsHow to gain access to the Control Panel Phone CommandsHow to Use Your TouchpadsARM Doors & Windows ARM Motion SensorsRF Thermostat Operation Programming Your SystemProgramming Instructions Lock and UnlockAccess Codes Enter the Master Access CodeHow to change an Access Code How to Delete an Access CodeLight Control House CodeHow to set time for light control ProgrammingOptions Unit NumberOption 01 Status Beeps Option 02 Panel VoiceOption 03 Latchkey Time Option 36 Sensor Activated Light Lockout Start Time Option 37 Sensor Activated Light Lockout Stop TimeOption 41 Voice Chime Option 42 Speaker LevelOption 43 Pager Phone Number Panel will call the pager to indicate the followingOption 55 Status Sounds Option 81 Heating Set PointAC Power Failure Trouble BeepsOption 82 Cooling Set Point System Battery Failure Sensor Low BatterySensor Failure Fail-To-CommunicateTesting System Access AlarmTesting Sensors To perform the sensor testAlarm System Testing CommunicationSetting the Clock LimitationsService Planning for EmergenciesEmergency Planning Your Floor Plan Simon Security System Simon Security System Simon Security System Access Codes Delay Times Sensor LocationsX10 Module Locations Sensor Number Sensor Type LocationControl Panel KeychainTouchpad Control Panel Touchpad Phone

60-875 specifications

The GE 60-875 is a powerful and versatile locomotive known for its robust construction and advanced technology tailored for freight transport. This locomotive is part of the General Electric's Evolution Series, which is designed to enhance efficiency, reduce emissions, and improve the overall performance of freight operations.

One of the main features of the GE 60-875 is its powerful engine, which produces an impressive output of 4,400 horsepower. This strong propulsion allows the locomotive to pull heavy freight trains across diverse terrains, making it a popular choice for freight companies looking to enhance their operational capacities. The locomotive is equipped with a 4-stroke, 16-cylinder engine, combining both power and efficiency in its design.

In terms of technology, the GE 60-875 is equipped with advanced computer systems that enable real-time monitoring of various operational parameters. This data-driven approach helps in optimizing performance and ensuring timely maintenance, thus reducing downtime. Additionally, the locomotive utilizes an automated throttle and brake control system, which enhances the driving experience and ensures seamless operation during transportation.

The GE 60-875 incorporates state-of-the-art emissions control technology, compliant with stringent regulatory standards. The use of selective catalytic reduction (SCR) technology significantly lowers nitrogen oxide emissions, contributing to a cleaner environment. This commitment to sustainability is a key aspect of its design, reflecting the industry's shift towards greener technologies.

Another notable characteristic of the GE 60-875 is the spacious and ergonomic cab design, which enhances the comfort of the crew during long journeys. The cab is equipped with modern controls and displays, allowing the engineer to monitor locomotive systems efficiently. With a focus on safety, the locomotive is designed with enhanced visibility and safety features that provide comprehensive operational oversight.

In summary, the GE 60-875 is a significant player in the freight locomotive market, combining power, efficiency, and advanced technology. With its high horsepower, emissions control features, and user-friendly cabin design, it stands out as a reliable choice for railway operators dedicated to performance and sustainability. This locomotive exemplifies GE's commitment to innovation in the rail industry, ensuring that it remains a top contender in the ever-evolving landscape of freight transport.
Top Page Image Contents