GE 60-875 manual Quick Exit, Latchkey, Subdisarm

Page 9

Note

The designated door may be opened and closed once. If you close the designated door behind you when you exit, you will have to disarm the system upon reentering. Leave the designated door open while using the Quick Exit feature.

Quick Exit

The Quick Exit feature is used when someone wants to briefly leave while the home is still armed (i.e. get the newspaper). This feature needs to be enabled by your installer. When you press the Disarm button the panel will announce exit time on. This will allow a designated exit door to be open for up to 2 minutes without triggering an alarm.

Latchkey

Latchkey is used to notify parents, via a numeric pager, if children do not arrive home at a predetermined time and disarm the system. For example, you set the Latchkey time for 3:00 pm. If the system isn’t disarmed by that time a message is sent to your numeric pager (see “Numeric Pager”).

Note

Any sensors that are bypassed by the system will NOT be protecting your home.

Note

No Entry Delay can be used in two ways. First, you can use this feature when you’re staying at home, after you’ve armed the system (i.e. when you’re asleep). Second, you can use this when you’re away from your home. To avoid causing an alarm, you must disarm the system with a remote handheld touchpad or keychain before entering your home. Check with your installer to find out how this option is programmed.

Note

This feature is most likely used when there is no one on the premises.

Subdisarm

If your system includes 24-hour protection sensors on items such as gun or jewelry cases, you must subdisarm the panel before accessing these areas to avoid causing an alarm. Environmental sensors, such as smoke and carbon monoxide stay active at all times.

￿Arming Your System with Doors & Windows Closed

1.Close all doors and windows.

2.Press Arm Doors & Windows button.

3.Enter Access Code (if needed).

Panel announces, Doors and windows on, Arm Doors & Windows light will be lit and the exit delay will begin.

￿Arming Your System with Doors or Windows Open (Indirect Bypassing)

1.Close all doors and windows except the ones you wish to remain open.

2.Press Arm Doors & Windows button.

3.Enter Access Code (if needed).

Panel announces any protected doors or windows that are open. Any sensors that are open when the system is armed will be bypassed automatically after exit. Arm Doors

&Windows light will be lit and the exit delay will begin.

￿Arming Your System with No Entry Delay

1.Close all doors and windows.

2.Press Arm Doors & Windows button twice.

3.Enter Access Code (if needed).

Panel announces, Doors and windows on, no entry delay. Arm Doors & Windows light will blink and the exit delay will begin.

￿Arm Motion Sensors

1.Press Arm Motion Sensors button once.

2.Enter access code (if needed).

Panel announces, Motions on. Arm Motion Sensors light will be lit and the exit delay will begin.

￿Activate Latchkey Feature

1.Press the Arm Motion Sensors button twice.

2.Enter Access Code (if needed).

Simon Security System

4

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Simon Security System FCC Part 15 Information to the User FCC NoticesCanada Notice Contents Testing Security System Components Introduction to Your Security SystemHow You Communicate to Your System How to Use Your Control Panel Quick Exit LatchkeySubdisarm Subdisarm Your System Disarming Your SystemChime Special Motion Chime DoorsDirect Bypassing Direct UnbypassingSystem How YourCommunicates To YouAlarm Siren and X10 Light Information Alarm Sirens and Lamp ModulesStatus Beeps Status BeepsPanel Indicator Lights Canceling Preventing Accidental AlarmsCanceling Accidental Alarms Numeric PagerGuidelines for Preventing Accidental Alarms How to Use an Off-Site PhoneHow to gain access to the Control Panel Phone CommandsTouchpads How to Use YourARM Doors & Windows ARM Motion SensorsProgramming Your System RF Thermostat OperationProgramming Instructions Lock and UnlockEnter the Master Access Code Access CodesHow to Delete an Access Code How to change an Access CodeLight Control House CodeProgramming How to set time for light controlOptions Unit NumberOption 01 Status Beeps Option 02 Panel VoiceOption 03 Latchkey Time Option 37 Sensor Activated Light Lockout Stop Time Option 36 Sensor Activated Light Lockout Start TimeOption 42 Speaker Level Option 41 Voice ChimePanel will call the pager to indicate the following Option 43 Pager Phone NumberOption 81 Heating Set Point Option 55 Status SoundsAC Power Failure Trouble BeepsOption 82 Cooling Set Point Sensor Low Battery System Battery FailureSensor Failure Fail-To-CommunicateSystem Access Alarm TestingTesting Sensors To perform the sensor testTesting Communication Alarm SystemSetting the Clock LimitationsService Planning for EmergenciesEmergency Planning Your Floor Plan Simon Security System Simon Security System Simon Security System Sensor Locations Access Codes Delay TimesX10 Module Locations Sensor Number Sensor Type LocationKeychain Control PanelTouchpad Control Panel Touchpad Phone

60-875 specifications

The GE 60-875 is a powerful and versatile locomotive known for its robust construction and advanced technology tailored for freight transport. This locomotive is part of the General Electric's Evolution Series, which is designed to enhance efficiency, reduce emissions, and improve the overall performance of freight operations.

One of the main features of the GE 60-875 is its powerful engine, which produces an impressive output of 4,400 horsepower. This strong propulsion allows the locomotive to pull heavy freight trains across diverse terrains, making it a popular choice for freight companies looking to enhance their operational capacities. The locomotive is equipped with a 4-stroke, 16-cylinder engine, combining both power and efficiency in its design.

In terms of technology, the GE 60-875 is equipped with advanced computer systems that enable real-time monitoring of various operational parameters. This data-driven approach helps in optimizing performance and ensuring timely maintenance, thus reducing downtime. Additionally, the locomotive utilizes an automated throttle and brake control system, which enhances the driving experience and ensures seamless operation during transportation.

The GE 60-875 incorporates state-of-the-art emissions control technology, compliant with stringent regulatory standards. The use of selective catalytic reduction (SCR) technology significantly lowers nitrogen oxide emissions, contributing to a cleaner environment. This commitment to sustainability is a key aspect of its design, reflecting the industry's shift towards greener technologies.

Another notable characteristic of the GE 60-875 is the spacious and ergonomic cab design, which enhances the comfort of the crew during long journeys. The cab is equipped with modern controls and displays, allowing the engineer to monitor locomotive systems efficiently. With a focus on safety, the locomotive is designed with enhanced visibility and safety features that provide comprehensive operational oversight.

In summary, the GE 60-875 is a significant player in the freight locomotive market, combining power, efficiency, and advanced technology. With its high horsepower, emissions control features, and user-friendly cabin design, it stands out as a reliable choice for railway operators dedicated to performance and sustainability. This locomotive exemplifies GE's commitment to innovation in the rail industry, ensuring that it remains a top contender in the ever-evolving landscape of freight transport.
Top Page Image Contents