Empire Products GWT-25-2, GWT-35-2, RB) Remote Bulb Control Installation Instructions, Models

Page 17

REMOTE BULB CONTROL INSTALLATION INSTRUCTIONS

MODELS

GWT-25 RB, GWT-35 RB, GWT-50 RB

INSTRUCTIONS

Note: At the option of the owner, the remote bulb control may be located on the left or right side of the outer casing.

1.Remove remote bulb control from the shipping carton.

2.Remove outer casing assembly from shipping carton.

Note: If wall furnace is already installed, remove outer casing from unit and lay on floor with front side down.

3.Attach wire assembly to remote bulb control.

4.Carefully unwind capillary wire on remote bulb control.

5.Remove (3) hole plugs from left or right side of outer casing where remote bulb control is to be installed.

6.Mount remote bulb control to inside of outer casing with (2) No. 6-32 x 1/4" (6mm)screws.

Index

Part

 

No.

Number

Description

1GW-130 Remote Bulb Control Kit

2

R-1224

Remote Bulb Control

3

R-2499

Wire Assembly

4

R-1162

Control Knob

5

R-1720

Plastic Clip (3 Required)

6

R-1223

Instructions

7

R-1578

No. 6-32 x 1/4" (6mm) Screw (2 Required)

Caution: Remote bulb wire routing is important. Wires should be in proper location to avoid damage from being overheated. Incorrect routing of remote bulb control wires may result in damage to wires and incorrect operation of remote bulb control. Follow these instructions and refer to the drawing for proper wire routing.

7.If remote bulb control is located on the right side of the outer cas- ing, carefully bend or loop capillary wire around control. This will enable the sensing bulb to be positioned at the bottom of the unit.

8.Secure sensing bulb on the inside, at the bottom, of the outer casing with (2) plastics clips.

9.Feed the wire assembly down along the inside of the outer casing.

10.Use third plastic clip to secure wire assembly and capillary wire to the casing. (Approximately 24" (610mm) from bottom of unit.)

11.Attach control knob to remote bulb control.

12.Install furnace according to instructions in the Installation Instruc- tions and Owner's Manual.

Note: If wall furnace is already installed, secure outer casing to unit.

13.Attach wire assembly to gas valve at the "TH" and "TH/TP" terminals on the Robertshaw valve.

Attach wire assembly to gas valve at the "THERMO" terminals on the ITT valve. If the wire assembly has two 1/4" (6mm) female connectors, the connectors should be cut off the wire assembly. Strip and bare the wires and attach wires to the "THERMO" terminals. Note: This remote bulb control is connected to the gas valve the same way as a wall thermostat. Any references made to the ther- mostat in the lighting instructions would also apply to the remote

TO VENT SAFETY

TO THERMOPILE

TO REMOTE BULB

12425-7-0406

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation Instructions Table of Contents This is a Heating Appliance Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction SpecificationsInsulated Vent Enclosure Recommended Vent ConfigurationOval all parts purchase locally Pressure Testing of the Gas Supply System Installing a New Main Gas CockGAS Supply Checking Manifold PressureVentilation and Combustion AIR ClearancesLocation ALL Models ROUGH-IN InstructionsPlastering Figure Installing Furnace FigureFinishing Instructions Outer Casing Figure Installing Control DoorSystem Check Figure Thermostat Location SG ModelsWhat to do if YOU Smell GAS Service technician or gas supplierLighting Instructions Proper Pilot Flame Vent Safety Shutoff SystemProper Main Burner Flame Main Gas Valve Does Not Open When Thermostat Is Turned On TroubleshootingPilot Does Not Light If Pilot Does Not Light By Any MeansHOW to Order Repair Parts Parts ListParts View GWT-25 RB, GWT-35 RB, GWT-50 RB Remote Bulb Control Installation InstructionsModels GWT-25 SG, RB, GWT-35 SG, RB, GWT-50 SG, RB Optional Blower Installation InstructionsGWTB-2 for Models GWTB-2 Wiring Diagram Service Notes

GWT-35-2, RB), GWT-25-2 specifications

Empire Products is renowned for its commitment to quality and innovation, particularly in the realm of heating solutions. Among their extensive range, the GWT-35-2 and GWT-25-2 gas-fired wall heaters stand out as exceptional choices for both residential and commercial applications.

The Empire GWT-35-2 is designed to deliver a powerful heating solution, boasting an impressive heat output. With an efficiency rating that ensures optimal warmth while minimizing energy consumption, this model is perfect for larger spaces that require consistent and reliable heating. Its sleek design allows it to seamlessly blend into various room aesthetics, while the multiple installation options make it versatile enough to meet varying layouts and preferences.

On the other hand, the GWT-25-2 is tailored for slightly smaller areas, yet it does not compromise on performance. This model provides ample heating efficiency and is well-suited for those looking to maintain a cozy atmosphere in modest-sized rooms. The unit’s compact form factor allows for easy installation without occupying too much wall space, making it an ideal option for residential settings.

Both models utilize advanced technologies that contribute to their superior performance. The state-of-the-art electronic ignition system in the GWT series ensures reliable startups, while the built-in thermostat provides precise temperature control. Users can easily adjust settings to their comfort levels, enhancing overall user satisfaction. Additionally, the heaters are equipped with innovative safety features such as automatic shut-off mechanisms, making them a safe choice for any environment.

Another key characteristic of the GWT-35-2 and GWT-25-2 is their fuel efficiency. By utilizing natural gas or propane, these units are designed to reduce energy costs without sacrificing heating quality. The durable construction of both models guarantees longevity and resilience, meaning customers can expect years of dependable service.

In summary, Empire Products' GWT-35-2 and GWT-25-2 wall heaters exemplify cutting-edge heating technology. Their combination of efficiency, performance, and safety features makes them a reliable choice for anyone in need of effective heating solutions, whether in a home or a commercial space. With Empire's commitment to quality, customers can feel confident in their investment in these powerful heating units.
Top Page Image Contents