Lennox Hearth II-T C FS, II-T C INS operation manual Table of Contents

Page 3

TABLE OF CONTENTS

 

Important Warnings

2

Testing / Listing, EPA, Using this Manual

3

Planning Your Installation

4-8

Manufactured (Mobile) Home Installation

8

Installation

9-20

Care and Operation

21-25

Routine Maintenance

26-30

Specifications

31-32

Definitions

33

Wiring Diagram

34

Troubleshooting

35-37

Replacement Parts List / Diagrams

38-41

Optional Accessories

42

Safety / Listing Label

43

EPA and Colorado Compliance Label

44

Simple Operating Instructions Label

45

Installation Tips Label

46

Ownership Records

47

LISTING / TESTING

Listing: The listing laboratory is ITS (Intertek Testing Services) and the listing mark is Warnock Hersey.

Testing: In accordance with the specifications and proce- dures listed in UL 1482 / ULC S627 / CSA B366.2M / ULC S628 & ASTM E1509 for solid fuel room heater, report # 5515, 12-91and ASTM E1509 Report # 476-1244, 3-96. This appliance has been independently tested to UL, ULC and CSA standards. UL 1482 & ULC S627 states re- quirements for installations as a freestanding room heater, or hearth insert for masonry fireplaces listed to UBC 37 or ULC S628, or factory built (zero clearance) fireplaces listed to UL 127 or ULC S610.The safety-listing label is located on an inside hopper surface of the pellet stove. Please read this safety label carefully. It contains impor- tant information about installation and operation of this appliance. This appliance is tested and listed for residen- tial installation according to current national and local building codes as:

A Freestanding Room Heater –FS

A Insert Room Heater – INS

A Manufactured (mobile) Home Heater – FS & INS

EPA (Environmental Protection Agency)

Status: EPA – Certified to comply with July 1990 par- ticulate emission standards.

PRODUCT IS SUBJECT TO CHANGE WITHOUT NO- TICE.

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW PELLET STOVE MANUFACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new pellet stove, you joined the ranks of thousands of concerned individuals whose answer to their home heating needs reflects their concern for aesthetics, efficiency and our envi- ronment. We extend our continued support to help you achieve the maximum benefit and enjoyment available from your new pellet stove.

It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure you years of trouble free warmth and pleasure.

Thank you for selecting a Lennox Hearth Products stove as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

PACKAGING LIST

The assembled pellet stove model Advantage II-T C FS and Advantage II-T C INS are packaged with an accessory pack- age, which contains the following:

One -

Installation and operation instructions manual.

One -

Warranty.

One -

EPA Label.

One -

Colorado compliance certificate

One -

Power cord.

One -

Damper hex wrench

One -

Grate scraper/tool.

One -

Wall thermostat.

One -

Roll of thermostat wire.

Two -

Leveling bolts, 3/8"-16 x 3 1/2” (Insert only)

One -

Ash pan trim cover

One -

Trivet

One -

Control board (Insert)

One -

Video tape

One -

Fireplace warning label (insert only)

One -

Damper rod assembly with tag

Surround Kit (For Advantage II-T C INS Only)

(Purchased separately, see page 42) kit is packaged with: One - Top surround panel.

One - Left surround panel.

One - Right surround panel with door.

Pedestal Kit (For Advantage II-T C FS Only)

(Included with freestanding stove) kit is packaged with: One - Pedestal assembly.

Three -Bolts, 3/8" x 1/2”. Three -Washers.

USING THIS MANUAL

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The home-

owner’s Care and Operation Instructions included here will

assure you have many years of dependable and enjoyable service from your appliance.

PAGE 3

www.PelletKing.com

Image 3
Contents Freestanding Insert Pellet Fired Stoves Installation and Operation ManualImportant Warnings Table of Contents Smoke Detectors Planning Your InstallationInstallation / Maintenance Standards Selecting a LocationFloor Protection Advantage II-T C FS Listed MaterialApproved Alternate Materials for Floor/Hearth Protection Clearances Minimum Clearances to CombustiblesAdvantage II-T C Masonry and Factory Built Fireplaces Model Advantage II-T C FS Pedestal Air Inlet Manufactured Mobile Home INSTAL- LationRemoving Appliance from Pallet InstallationASH PAN Cover Assembly Installing Pedestal to BodyAfter you have begun operation of your stove Installation Check ListCheck list Prior to lighting your stoveTop Surround Panel Rear View of Advantage II-T C FS Thermostat InstallationVenting Requirements Manufactured Mobile Home Chimney Height Requirements Vent TerminationPipe Selection Chart Determining Size of Pipe to InstallInstallation Chart Sample Installation ChartPipe Advantage II-T C FS Corner Through the Wall Top View IllustrationHorizontal Vent Through the Wall Existing Class a Chimney Vertical Vent Into a Masonry FlueInstallation Advantage II-T C INS Vent Termination When Liner is UsedUSA & Canada Direct Connection / Posi- tive Flue Connection Important Notes Installing Advantage II-T C INSCare and Operation Control Board OperationControl Board Turning OFF Your Pellet Stove PRE-LIGHTING InstructionsStarting Your Pellet Stove General Operating ConsiderationsDamper In less air Damper OperationOverheating Damper Adjustment GuidelineAutomatic Safety Features Power OutageUltraGrateTM FuelUltraGrateTM ASH PAN Advantage II-T C FS Routine MaintenanceRoutine Cleaning Proper Disposal of AshesHeat Exchanger Tubes ASH Trap and BafflesDoor Rope Gasket Minimum Frequency of 3 months to 1 yearCreosote Removal Advantage II-T C FS Opening Side Panels Window WashRemove Window Wash Bracket Opening Side PanelsMotor Lubrication Small Area Paint TOUCH-UPSpecifications Advantage II-T C FS Side View IllustrationBack View Illustration Side View Front ViewComponent Definitions Wiring Diagram Troubleshooting Qualified Technicians Only Damper Adjustment Guidelines Troubleshooting Qualified Technicians Only Replacement Parts List Firebox Parts Freestanding Only PartsInsert Only Parts Miscellaneous PartsReplacement Part Diagrams Firebrick KitPiece Set UltraGrate TM Kit Pressure Switch Kit Log Set Cat. #H0430 Optional Accessories List and DiagramsCatalog # Model Description Stove Model Gold Trivet Cat. # H0423 Surround Kits & Trim KitsAdvantage II-T C Pellet Stove Safety Label Advantage II-T C EPA Label & Colorado Compliance Label Simple Operating Instructions Label Installation Tips Ownership Records Service and Maintenance LOGWest Taft Avenue Orange, CA

II-T C FS, II-T C INS specifications

The Lennox Hearth II-T C INS and II-T C FS are exemplary models in the world of modern heating solutions, designed for efficiency, comfort, and style. With innovative engineering and advanced technology, these units cater to the needs of contemporary homeowners seeking reliable and aesthetically pleasing heating options.

One of the main features of the Lennox Hearth II-T C INS and II-T C FS is their exceptional efficiency ratings. These models are designed to operate at high efficiency levels, reducing energy consumption while providing optimal warmth. This not only translates to lower utility bills but also represents a more sustainable choice for environmentally conscious consumers.

A standout characteristic of these products is their versatility in installation. The II-T C INS is an insert model, allowing it to be fitted into existing fireplaces easily. This makes it an ideal option for homeowners wanting to upgrade their current heating systems without extensive renovations. The II-T C FS, on the other hand, is a freestanding stove that adds a classic touch to any room, making it a perfect focal point while offering powerful heating capabilities.

Both models are equipped with advanced technology designed for seamless operation. The hot air circulation system ensures that warmth is evenly distributed throughout the space, eliminating cold spots and enhancing overall comfort. In addition, their adjustable thermostats allow users to set the desired temperature with ease, ensuring a consistent indoor environment.

The Lennox Hearth units are also designed with user convenience in mind. They come with easy-to-use controls and can often be integrated with smart home systems, offering the flexibility to monitor and adjust settings remotely. This modern approach to home heating makes it simple for users to maintain a cozy atmosphere, even on the coldest days.

Moreover, Lennox places a strong emphasis on safety. These heating models include features such as a glass door that remains cool to the touch and a built-in safety shut-off system, providing peace of mind for families.

In summary, the Lennox Hearth II-T C INS and II-T C FS models stand out for their efficiency, versatility, advanced technology, and safety features. With a focus on optimal performance and user convenience, these units represent a significant advancement in home heating, making them an attractive choice for those looking to enhance their living spaces while staying warm and comfortable.