6
A c o u s t a s o n i c ™ J r D S P
Your new Acoustasonic™ Junior DSP amplifier delivers
•40 Watts x 2 (80W total) output power
•16 DSP stereo effects per channel
•Independent channels voiced specifically for acoustic instruments and for vocals
•Exclusive String Dynamics™ control allows attenuation of the
•Feedback notch and phase reverse feedback controls
•Stereo effects loop jacks
•Balanced
•Footswitch (optional) for remote on/off switching of DSP effects
Thank you for choosing Fender®
F ro n t P a n e l
CHORUS DELAY +DLY
REVERB
+CHREVERB +DLY
| DELAY |
CHORUS | REVERB |
+DLY | +DLY |
REVERB 
PLATE +CH 
|
|
|
|
|
|
| CHORUS |
| PLATE |
|
|
|
|
| CHORUS | ROOM |
|
|
|
|
|
|
|
|
|
| ROOM |
|
|
|
|
|
| ||
|
| PHASE |
|
|
|
|
|
|
|
|
| PHASE |
| VIBRATONE |
| ON | |
|
|
|
| FEEDBACK | STRING | VIBRATONE | HALL |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| HALL |
|
| ||||
INSTRUMENT | VOLUME | TREBLE | MID | BASS | NOTCH | DYNAMICS | FX SELECT | FX LEVEL | MIC | LINE /INST. | VOLUME | TREBLE | BASS | FX SELECT | FX LEVEL | POWER | |
A.INSTRUMENT - Plug your acoustic guitar in here.
B.VOLUME - Adjusts the loudness of the Instrument channel.
C.PHASE - Reverses the phase of the Instrument channel which may reduce feedback in some situations.
D.TREBLE/MID/BASS - Adjusts the tone of the Instrument channel in the
E.FEEDBACK NOTCH - Rotate slowly to locate and suppress feedback at a specific frequency on the Instrument channel. Set to “1” when not needed.
F.STRING DYNAMICS™ - Controls a dynamic tone shaping filter on the Instrument channel. Rotating clockwise reduces the
G.FX SELECT - Selects one of 16 DSP effects for the Instrument channel (see DSP Effects on page 7).
H.FX LEVEL - Adjusts the level of the selected DSP effect for the Instrument channel.
I.MIC - Balanced XLR input jack intended for a low- impedance microphone.
J. LINE - Input jack intended for a
unbalanced 
(TS) or balanced 
(TRS) inputs.
K. VOLUME - Adjusts the loudness of the Mic/Line channel.
L. PHASE - Reverses the phase of the Mic/Line channel which may reduce feedback in some situations.
M. TREBLE/BASS - Adjusts the tone of the Mic/Line channel in the high- and
N. FX SELECT - Selects one of 16 DSP effects for the Mic/Line channel (see DSP Effects on page 7).
O. FX LEVEL - Adjusts the level of the selected DSP effect for the Mic/Line channel.
P. POWER - Switches the amplifier on and off as indicated by the power “ON” LED.
Q. IEC SOCKET (rear panel) - Connect the supplied power cord to a grounded AC receptacle in compliance
with the voltage and frequency ratings specified on the rear panel of your amplifier.
www.f e n d e r.com ✧ www. m r g e a r h e a d .net