Accessing Other Partitions
To Access another Partition
Each keypad is assigned a default partition for display purposes, and will show only that partition's information. But, if the user is authorized, a keypad in one partition can be used to perform system functions in other partitions by using the GOTO command. Note that only those partitions authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
READY
1. Enter your security code, then press
✳
+ partition number
Entering partition number 0 will return the keypad to its original partition.
2.
LOG-ON TO AAAA PART. X COMPLETE
The keypad will remain in the new partition until directed to go to another partition, or until 2 minutes has elapsed with no keypad activity.
AAAA= alpha descriptor programmed by the installer
X = partition number
Global Arming
The Global Arming option may be assigned for use by some users. If Global Arming was enabled for use with your security code, a keypad prompt (message) shown below appears after pressing one of the arming function keys (STAY, INSTANT, AWAY, MAXIMUM, OFF).
ARM P 1 2 3 4 5 6 7 8 HIT 0-8 X X X - - X - -
The prompt displays all the partitions. The user may only arm/disarm the partitions they are assigned access to.
To select the partition(s) that are to be armed, enter the desired number
Pressing 0 will turn all partitions the user is assigned access to on/off.
When completed, press ✳ to exit. All the partitions with the “X” will then arm/disarm.
– 22 –