Honeywell VISTA-128SIA manual Accessing Other Panels cont’d, Multi-Partition Multi-Panel Mode

Accessing Other Panels (cont’d)

Multi-Partition Multi-Panel Mode

To access the multi-partition multi panel mode, perform the following steps:

1. Enter your security code + # + 8 + 8

2.The keypad displays the following:

PANELnn	1 2 3 4 5 6 7 8
STATUS	x x x x x x x x

where “nn” = panel id # (01-08), “12345678” are the partition #’s and “xxxxxxxx” is the status of each partition of that panel. Possible status indications include:

A = Armed Away	S = Armed Stay	M = Armed Maximum
I = Armed Instant	R = Ready	N = Not Ready
B = Bypassed/Ready	✴ = Alarm	T = Trouble
F = Fire Alarm	P = AC Power Failure	L = Low System Battery

C = Comm Fail

NOTES: See the table that follows for priority of displays.

A “.” under a partition number indicates the user does NOT have access to that partition.

Use the following keys to perform a function in this mode:

Press	1	to attempt to disarm all partitions.
Press		to attempt to arm AWAY all partitions.
	2
Press		to attempt to arm STAY all partitions.
	3
Press		to attempt to arm MAXIMUM all partitions.
	4
Press		to attempt to arm INSTANT all partitions.
	7
Press	✳	to read the status of the next panel.
Press		to read the status of the previous panel.
	#
Press		to exit mode. After a few seconds, the keypad displays the status
	0

of the original partition of the original panel for the keypad. Also, this mode will end in approximately 120 seconds if no keys are pressed.

– 28 –