14 | Installation Guide |
7.Use the Query Analyzer to connect to the
8.Open up the ODBC application in the Control Panel and create a link to the
9.The database server can now be started. Launch the User Interface and connect using ADMIN as the name without a password.10. The database should now be programmed to accommodate the PRO22IC panel
and accompanying I/O boards. Refer to the WINPAK PRO Installation Manual for additional detail. The programming should continue until the system is fully functional and communications have been established. Below are the programming requirements for setting up the PRO22IC panel.
A.Direct to Port selection required when adding a new PRO22IC.
B.A unique TCP/IP address is required for assignment to the panel and should match the IP address you programmed through the Cobox software.
C.Program all the ADV’s for the hardware so that you will be able to monitor the points and system alarms.
D.Once the program is configured, shut down the User Interface and restart all the services. Launch the User Interface and verify communications.
E.Program the Communications Server with Local Machine for the Node Name.
F.Program a Control Map and/or Floorplans with the hardware. Example: Panels, SIO boards, Inputs, Outputs, readers, Comm Server.
G.All Servers added to the Device Map use Local Machine for the Node Name.
NOTE: Use the SQL Enterprise Manger to backup the programmed database. Refer to the SQL Server Manual for instructions.
CAUTION: If the instructions describing the Data Transformation Services are not followed exactly your database could be overwriten.
Second PC Installation
Follow Instructions 1 through 4 and 6 through 8 listed on pages 12 and 13.
Enterprise Manager Setup
1.Open up Enterprise Manager from the secondary PC, the PC you will use for Redun- dancy.
2.
3.
4.
5.Click Next. Verify that the Server is selected as MAIN. The database should be