Honeywell L5100 manual System Overview

		SYSTEM OVERVIEW
		About the Display and Indicators
ICON	TEXT	DEFINITION
	Alarm 96	The Medical icon displayed when a medical alarm is activated.
	Medical	“Alarm” is also displayed in a red band along the top of the
		screen.
		(If programmed for display by your installer)
	Alarm 99	The alarm (bell) icon when a burglary alarm is activated.
	Police	“Alarm” is also displayed in a red band along the top of the
		screen. (If programmed for display by your installer) No
		display if 24 Hour Silent Response Type has been
		programmed.
	CO Alarm	Displayed alternately with Carbon Monoxide when a CO alarm
		is activated.
		“CO Alarm” is also displayed in a red band along the top of the
		screen.
	Cover	A check system icon along with “Cover Tamper” is displayed
	Tamper	when a cover tamper has been detected. “Ready To Arm –
		System Trouble” is displayed in a yellow band along the top of
		the screen.
	Reporter	The system has identified a problem with the telephone dialer.
	Failure
	Low	“Not Ready To Arm – System Trouble” is displayed in a yellow
	Battery	band along the top of the screen. A low battery icon along with
		“Low Battery” is displayed when the system’s backup battery
		power is low.
	90 RF Jam	Appears when the system has detected an RF jamming
		condition or excessive interference.
	94 Phone	Appears when the system has detected a loss of telephone
	Line Cut	service.

AC Loss

Displayed when the system has lost AC power. “Ready To Arm – System Trouble” is displayed in a yellow band along the top of the screen.

– 13 –