Honeywell L5100 manual Disarming the System and Silencing Alarms

SECURING THE PREMISES

Disarming the System

Select the “Disarm” icon or the “Off” key to disarm the system and to silence alarm and trouble sounds. See the Summary of Audible Notification section for information, which will help you to distinguish between fire and burglary alarm sounds. During Entry Delay or when an Alarm Condition exists, the system will be disarmed as soon as the correct user code is entered on the touch screen. Selecting the Off key is not required. The entry beeps or alarm sound can be silenced by pressing any key however, it will restart in 10 seconds if the correct User Code is not entered. The Ready indicator will light (if no alarms have occurred while armed) and the control will beep once to confirm that the system is disarmed.

**IMPORTANT**

If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

Disarming the System and Silencing Alarms

Armed Stay

			72
	Zones		Automation
Disarm	Message		Phone
	10:18 AM June 8, 2010		More
			5000-100-056-V1
	Armed Stay
	1	2	3
	4	5	6
Enter Code:	7	8	9
Cancel	Clear	0
			5000-100-065-V0

1.Select the “Disarm” icon or depress the “Off” key. The system beeps once and displays a keypad.

2.Enter a valid Code. The system beeps once and announces “Disarmed Ready to Arm”.

Note: If a valid user code is not entered or the Confirm icon has not been selected within 30 seconds, the system returns to the “home” screen and it will not be disarmed.

If an invalid User Code is entered, system will return to the home screen.

– 26 –