Honeywell 800-06894 manual Navigating Menus, LCD Display, Navigation Keys, Lynx Touch Home Screen

SYSTEM OVERVIEW

Navigating Menus

LCD Display

LYNX Touch’s Liquid Crystal Display (LCD) touch-screen displays variable icons and text on “screens”. The screen displays status icons and associated text, the current time, system status information and menu choices. The system status is displayed in a colored band along the top of the screen. The band color is variable and will change between red, yellow and green as the system status changes.

The Menu area includes a list of commands, or choices that apply to the current selection. The status area provides information about various system events. A “Home Screen” is displayed whenever power is applied to the system. In addition the green ‘READY” LED will be lit.

SYSTEM

STATUS

SYSTEM/ZONE

STATUS

Ready To Arm

ZonesSystem

Arm Away	Arm Stay	Message	Phone
Delay	10:18 AM June 8, 2010		More

5000-100-054-V0

LYNX Touch Home Screen (page 1)

Navigation Keys

Navigating through the screens is accomplished by lightly touching the menu item on the touch-screen. Once activated, the control will take you to the next screen. Selecting the “Home” (cancel) key or the “2” Key will return you to the home screen at any time unless System Programming mode is active.

Note: You may find it convenient to adjust the volume setting before entering the Program (Tools) Mode. This will allow you to clearly hear the feedback announcements or system beeps in the Programming Mode, of the system’s built-in speaker. To adjust the volume, select “More” on the “home Screen” and then select “Settings”. Adjust the volume using the slide shown on the Settings screen and then select “Save” to accept.

– 15 –